Yamaha CRW2200IX No sound of CD-DA audio CD disc is audible, Setting of the Windows Media Player

Page 34

Troubleshooting

No sound of CD-DA (audio CD) disc is audible.

●Check that the LINE OUT jacks (L/R) of the CRW2200IX drive is connected correctly to the sound card or powered speakers. (→P. 10)

●For users with Windows Me, no sound is audible from headphones connected to the headphone jack of the CRW2200IX drive or from powered speakers connected to the LINE OUT jacks (L/R) on the rear panel of the CRW2200IX drive.

Make sure settings are as shown below.

(When you are using Windows Media Player 7.0 with Windows Me, the above symptom is known to exist because the default setting is set to ON for “Digital playback.”)

1 The “Properties” setting of the CRW2200IX drive.

➀Open the “YAMAHA CRW2200E Properties” window and click on the “Properties” tab.

➁Uncheck the “Enable digital CD audio for this CD-ROM device.” check box.

2The setting of the Windows Media Player.

➀ Start “Windows Media Player.”

➁Click “Tools” on the Menu and click on “Options” to open the “Options”

window, then click on the “CD Audio” tab.

➂Uncheck the “Digital playback” check box.

26

Image 34

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii About handling CD-R/RW discs Precautions for TransportationCopyrights Table of Contents Features of the CRW2200IX Drive IntroductionCD Text support High-fidelity digital audioAbout IEEE1394 Buffer Underrun Defined Yamaha Buffer Underrun ProtectionSystem Requirements Before UseWindows Users Hard Drive Space Macintosh UsersCD Writing Software Operating SystemCD-RW discs*2 Supported DiscsCD-R discs*1 High Speed CD-RW discs*3About CD-ROMs About Partial CAV Constant Angular VelocitySerial Number Serial NoFront and Rear of Unit Front PanelRear Panel ➁ Power switch STANDBY/ON➂ DC-IN connector ➀ Line OUT jacks L/RSetup Procedures Windows UsersConnecting Macintosh UsersInstall the CD Writing Software Set Up the CRW2200IX DriveElectrical plugs/sockets vary according to country/region Turn on the CRW2200IX drive LEDConnection to a PC desktop or tower type computer Connection to a PC notebook computer via CardBus cardConnection to a Macintosh computer Rear panelConfiguring for the Operating System For Windows 98 Second Edition/MeYou can also check the FireWire version in this window Disconnecting Devices Connecting and Disconnecting IEEE1394 DevicesConnecting Devices OperationLoading a Disc Ejecting a DiscEjecting a Disc in an Emergency Drive does not turn on Troubleshooting Yamaha CD-R/RW Drive web site Computer does not start upDisc tray does not open Disc keeps being ejectedDisc is not loaded Setting of the Windows Media Player Properties setting of the CRW2200IX driveNo sound of CD-DA audio CD disc is audible Buffer Underrun error message is displayed Other symptomsUnstable operations Connecting in a tree Connecting Multiple IEEE1394 Peripherals TogetherConnecting in a daisy-chain AppendixAppendix Disc-at-Once DAO Writing ModesTrack-at-Once TAO Session-at-Once SAO Packet WritingDetermining the Firmware Version of the CRW2200IX drive About the FirmwareFor Macintosh LED Indicator Messages Status Indicator Messages LED ColorCRW2200IX Specifications Supported FormatsTwo 6-pin connectors power not supplied to connectors ports CRW2200IX series complies with the following specifications AC adapterSymbols IndexYamaha CD-R/RW Drive web site EUROPE, Eastern Europe Russia