Siemens HC15 manual Installed Devices and Tools, Siemens Hsdpa USB Modem

Getting Started with HC15

Confidential / Preliminary

s

2.5Installed Devices and Tools

After successful installation, the devices listed below are available. Under Windows XP, you can use the Device Manager to check that all components are properly installed and configured.

Siemens HSDPA USB Modem

•AT command and data interface, also referred to as “Modem” port if queried using the AT^SQPORT command.

•Intended particularly for HSDPA and GPRS data connections.

•The virtual COM port Windows has assigned to the AT command and data interface is listed in the Device Manager under Modems.

•The port number can be gathered from Control Panel Phone and Modem Options. This COM port can be used to set up dial-up network connections. The bit rate set by default on the Modem property page is not relevant for USB and can be left unchanged. On the Advanced tab you can put the command string used to define the PDP context for your

GPRS / HSDPA provider. See also Chapter 3.7.

HC15_startup_v01 Page 12 of 31 2007-01-22