Siemens HC15 manual Most cases, it is sufficient to accept the default settings

Getting Started with HC15

Confidential / Preliminary

s

On the Networking tab, the default settings are acceptable in most cases: The drop-down menu shows PPP: Windows 95/98/NT/2000, Internet for the type of dialup server as default.

In the PPP settings box, verify that Enable LCP extensions, Enable software compression are selected and click OK.

Select the Internet Protocol (TCP/IP) on the Networking tab and press the Properties button to go to the General page:

In most cases, it is sufficient to accept the default settings:

Obtain an IP address automatically and Obtain DNS server address automatically. Otherwise, you have to select the options Use the following IP address / Use the following DNS addresses and specify the IP addresses provisioned by your network operator.

The Advanced button

opens a further property page where you can set your

preferences when working in a local network and a dial-up network at the same time.

HC15_startup_v01 Page 28 of 31 2007-01-22