Siemens HC15 manual Hsdpa or Gprs Data Transfer via Dial-Up Network

Getting Started with HC15

Confidential / Preliminary

s

3.10.2HSDPA or GPRS Data Transfer via Dial-Up Network

Before dialing, make sure that the virtual COM port is not used by any application (eg. by a terminal program or by the host application).

Also, ensure that you have the PDP context for your service provider defined by using the AT+CGDCONT command. The command string can be entered either on the Modem property page on the Windows Control Panel or in the host application (see Chapters 2.5 and 3.7).

From to the Control Panel, choose Network Connections and select the dial-up connection created for HC15. (Instructions on how to create a new dialup connection can be found in chapter 4.1)

The correct dial string *99***1# should already be given, if entered in the Phone number box when the dial-up connection was added. Otherwise, you can type the number here before dialing.

User name and password may or may not be required, depending on the network operator.

The connection is properly established when the following messages are reported:

To verify the data rates for up- and/or downlink, you can use, for example, the file download status dialog of your Internet browser.

HC15_startup_v01 Page 21 of 31 2007-01-22