Behringer SNR2000 manual Specifications

Page 24

DENOISER SNR2000

	Fig. 5.1: Different plug types
6. SPECIFICATIONS
Analog inputs
Connectors	XLR and 1/4" TRS
Type	RF filtered, servo balanced input
Impedance	80 kOhms balanced
Nominal operating level	-10 dBV to +4 dBu (switchable)
Max. input level	+20 dBu balanced and unbalanced
Analog outputs
Connectors	XLR and 1/4" TRS
Type	Electronically servo-balanced output stage (optional transformer-balanced)
Impedance	40 Ohms balanced or unbalanced
Max. output level	+26 dBm balanced, +20 dBm unbalanced

24	6. SPECIFICATIONS

Image 24

Contents User’s Manual Safety Instructions Detailed Safety InstructionsForeword Denoiser Table of Contents Introduction Design conceptBefore you begin Control elementsFront panel control elements Operation Operation of the filter sectionTAC filter of the Denoiser Operation of the dynamic filterDenoiser SNR2000 Operation of the expander section IRC expander of the Denoiser Function of an expanderDenoiser SNR2000 Initial settings of the Denoiser ApplicationsCouple function We recommend the following control settings Studio applicationsNoise reduction during recording Noise reduction in the effects bus Noise reduction on keyboards Technical Background What are audio dynamics?Compressors/limiters Expanders/noise gatesDownward expansion Noise as physical phenomenonCompanders Installation Single-ended principleRack mounting Audio connectionsSpecifications THD Warranty § 1 Warranty CARD/ONLINE Registration § 2 Warranty