Peerless Industries PRS-UNV-W, PRS-UNV-S manual Installation to Threaded Rod

Installation to Threaded Rod

(Not evaluated by UL - Professional installation only)

Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the

4 desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods using two 3/8-16 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.

3/8 -16 THREADED ROD

(NOT INCLUDED)

	3/8 -16 THREADED ROD
	(NOT INCLUDED)
	3/8 -16 HEX THIN
	NYLON-INSERT
3/8 -16 HEX THIN	LOCKNUT
	(NOT INCLUDED)
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)

A

A

FRONT OF

MOUNT

	3/8 -16 HEX THIN	3/8 -16 HEX THIN
		NYLON-INSERT
	NYLON-INSERT
		LOCKNUT
	LOCKNUT
		(NOT INCLUDED)
	(NOT INCLUDED)
fig. 4.1		fig. 4.2

FRONT OF MOUNT

7 of 12 ISSUED: 09-19-05 SHEET #: 055-9441-10 06-04-11

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.