Chauvet Projector Accessories Operating Instructions, Using the Control Panel, Menu Map

4.OPERATING INSTRUCTIONS

Using the Control Panel

Access control panel functions using the four buttons located directly underneath the LED display.

	BUTTON	FUNCTION
	<MODE>	Used to scroll through the current
		operating mode, as well as back
		out of the current menu option
	<UP>	Used to select a increasing value
	<DOWN>	Used to select an decreasing
		value
	<ENTER>	Used to activate a selection and
		store it to memory
Menu Map

Mode	Selection 1	Selection 2	Description
DMX Mode	Addr		DMX Operation
		d001~d512	Select the DMX starting address
Slave	SLAU		Slave
Operation
Invert	H-		Invert the operation (pod 1 becomes pod 6)
		No~YES	Select YES to activate this function
Sound-active	SoUd	rUn	Trigger the built-in program to the beat of the
			music, using the internal microphone
	P-		Trigger the built-in programs with variable
Automatic			speed
		P-_1~10	Select one of the built-in programs
		S 01~S100	Adjust the speed of the automatic program

Configuring the Starting Address

The 6SPOT™ fixture uses up to eight DMX channels.In this DMX configuration/personality, the highest configurable address is 505. Any address higher than this will prevent access to all of the channels while in this mode; however, if you desire to use one of the other DMX configurations (personalities), please consider the total DMX channels when selecting a DMX address.

If this is your first time using DMX, we recommendreading the “DMX Primer” section in the “Appendix”.

4. Operating Instructions 8 1/13/2011 5:38 PM