Chauvet Projector Accessories user manual DMX Operation, DMX Channel Values

Operation

DMX Operation

This operating mode will allow for control with an external DMX controller. You must set the starting address for this mode.

If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.

Please see the instructions below for details on this mode.

1.Plug the fixture into power.

2.Plug a DMX controller into the fixture in a daisy chain configuration.

3.Press <MODE> until Addr appears on the LED screen.

4.Press <ENTER>.

5.Using <UP>&<DOWN>, select the DMX starting address.

6.Press <ENTER>.

DMX Channel Values

CHANNEL	VALUE	FUNCTION
		Pod 1
	000  010	Blackout
	011 045	Red
1	046 080	Green
	081 115	Blue
	116 150	Yellow
	151 185	Magenta
	186 220	Cyan
	221255	White
		Pod 2 (run speed when CH.8 is between 011~239)
	000  010	Blackout
	011 045	Red
2	046 080	Green
	081 115	Blue
	116 150	Yellow
	151 185	Magenta
	186 220	Cyan
	221255	White
		Pod 3~6
	000  010	Blackout
	011 045	Red
3~6	046 080	Green
	081 115	Blue
	116 150	Yellow
	151 185	Magenta
	186 220	Cyan
	221255	White
7		Strobe
	000009	No function
	010255	Strobe (slow~fast)
		Mode
	000010	Individual pod control with strobing (channels 1~7)
	011047	Automatic 1
	048095	Automatic 2
	096119	Automatic 3

8120144 Automatic 4

145167 Automatic 5

168191 Automatic 6

192215 Automatic 7

216239 Automatic 8

240255 Sound-active

4. Operating Instructions 9 1/13/2011 5:38 PM