5. SYSTEM SETUP: Advanced menu
Function | Description | |
| Network | |
| Selecting On enables the function. The projector is able to provide the | |
| network function when it is in standby mode. | |
| Monitor Out | |
| Selecting On enables the function. The projector can output a VGA | |
| signal when it is in standby mode and the COMPUTER 1 jack is | |
| correctly connected to devices. See "Connection" on page 17 for how | |
| to make the connection. | |
Standby | Audio Pass Through | |
Settings | The projector can play sound when it is in standby mode and the | |
| corresponding jacks are correctly connected to devices. Press / to | |
| choose the source that you wish to use. When you select Computer, | |
| audio signal can only be fed into the | |
| select | |
| IN L/R jacks. There is no need to connect the audio cable when | |
| HDMI is selected since the HDMI cable carries audio signal. | |
| See "Connection" on page 17 for how to make the connection. | |
| Enabling this function slightly increases the standby power consumption. | |
|
| |
| Wired LAN | |
| See "Controlling the projector through a LAN environment" on page | |
| 36 for details. | |
Network | AMX Device Discovery | |
Settings | Selecting On enables the function. When AMX Device Discovery is | |
| On, the projector can be detected by AMX controller. | |
| Mac Address | |
| Displays the mac address of this projector. | |
|
| |
Reset All | Returns all settings to the factory preset values. | |
The following settings will still remain: Language, Phase, H. Size, User 1, User | ||
Settings | ||
2, Color Space Conversion, Projector Position, High Altitude Mode, Security | ||
| Settings, Network Settings and Baud Rate. | |
|
|
48 Operation