3M C2167PW manual Maintaining Your Touch Display, Touch Sensor Care and Cleaning

Page 8

8

3M™ Multi-Touch Display User Guide

3M does not warrant that we are USB compliant pursuant to USB specifications.

Maintaining Your Touch Display

To maintain your display and keep your display operating at peak performance:

Keep your display and touch sensor clean.

Adjust the display video controls.

Do not install the display in a place where ventilation may be hindered. Always maintain adequate ventilation to protect the display from overheating and to promote reliable and continued operation.

Touch Sensor Care and Cleaning

The touch sensor requires very little maintenance. 3M Touch Systems recommends that you periodically clean the glass touch sensor surface. Be sure to turn off your display before cleaning.

Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning agent for your touch sensor.

Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.

Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning liquid onto the cloth, not the sensor, so that drips do not seep inside the display or stain the bezel.

CAUTION

To avoid the potentially hazardous situations associated with the use of alcohol or other solvents which may cause minor or moderate injury or property damage:

Follow all instructions and recommendations in the manufacturer's Material Safety Data Sheet and product label.

Be sure to follow solvent manufacturer's precautions and directions for use when using any solvents

It is important to avoid using any caustic chemicals on the touch sensor.

3M Touch Systems Support Services

3M Touch Systems, Inc. provides extensive support services through our website and technical support organization. Visit the 3M Touch Systems website at http://www.3m.com/touch/, where you can download software and drivers, obtain regularly updated technical documentation on 3M Touch Systems products, and learn more about our company.

Whenever you contact Technical Support, please provide the following information:

Touch display size, part number and serial number

Current driver version

Operating system used

Information on additional peripherals

3M Touch Systems, Inc. Proprietary Information – TSD-44310 REV B

Image 8
Contents 3M Multi-Touch Display User Guide 3M Multi-Touch Display User Guide Contents Overview Multi-Touch Display FeaturesIntroduction Important Safety Information Explanation of Signal Word ConsequencesTouch Screen for Multi-Touch Displays Intended Use∙ Do not install or use this product in a hazardous location Important Notes Maintaining Your Touch Display Touch Sensor Care and Cleaning3M Touch Systems Support Services Contact 3M Touch Systems Setting Up Your Multi-Touch Chassis Display Unpacking Your Touch DisplayTop and bottom brackets Attaching the Side BracketsC2167PW Connecting the Display Supported Video Display Modes and Refresh RatesConfiguring the Display Settings Adjusting the Multi-Touch Chassis Video DisplayDisplay Mode User Controls For On Screen DisplayOn-Screen Display Menus How to Use the OSD MenusContent Troubleshooting Your Multi-Touch Chassis Display No image appears on screenImage is unstable and flickering All Other Platforms Enabling Your Multi-Touch Chassis DisplayWindows 7 USB Compatibility Installing 3M MicroTouch Software Multi-Touch Application SupportRegulatory Information Regulatory Agency ApprovalsFCC Warning