Brother PT-1500PC manual Printing a label, Hiding/displaying P-touch Quick Editor Windows only

3Select the desired print settings.

Cut Marks: This option allows you to select whether or not to print cut marks (:), which indicate where to cut the label so that the left and right margins are equal.

Mirror Printing: This option allows you to print the text in reverse so it can be attached to a window.

Copies: This option allows enter the number of copies to be printed.

4(Windows) Click the OK button.

(Macintosh) Click [Print]. The layout is printed.

(Windows) To begin printing:

1Either click the Print button ( ), or click the arrow beside the Print button, and click [Print] in the drop-down menu.

2Select the desired print settings.

3Click the OK button.

Hiding/displaying P-touch Quick Editor (Windows only)

P-touch Quick Editor can be hidden by clicking the Hide button ( ). Re-display P-touch Quick Editor by clicking its icon in the system tray, at the right of the taskbar.

Quitting P-touch Quick Editor

•(Windows) Do either of the following:

￿Right-click the P-touch Quick Editor icon in the system tray, and then click [Exit] in the menu that appears.

￿Right-click in the label view (or text box), and then click [Exit] in the menu that appears.

(Macintosh) Do either of the following:

￿Click [Quit] in the [File] menu

￿Hold down the Control key and click in the label view (or text box), and then click [Quit] in the menu that appears.

Printing a label

1Turn on the PT-1500PC and start up the computer.

2Start up either P-touch Quick Editor or P-touch Editor Ver. 3.1, and make sure that the PT-1500PC is selected as the printer.

3Design your label.

4Click the [Print] command in the application,

select the desired print settings, and then click the Print button. The status indicator of the PT-1500PC flashes while it is receiving the data. After the label is printed, press in on the tape cutter button to cut off the label.

￿While printing multiple copies, the PT-

1500PC may stop printing for a short while in order for the print head to cool down. Printing will continue once the print head has sufficiently cooled down.

￿ To feed out extra tape, hold down the Power/Feed key for a few seconds.

18