Brother HL-760 Series manual Loading Paper into the Feeder

CHAPTER 2 PAPER HANDLING

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.

1.Open the multi-purpose sheet feeder by gently pulling the lid forward towards you. ( ➀ ).

2.Load paper into the multi-purpose sheet feeder with the printing surface face down. (➁ )

!Caution

∙The feeder can hold up to 200 sheets of plain paper (75 g/m2, 20 lb.). If you load too many sheets, paper jams could occur.

∙Make sure that the paper is stacked below the ▼ mark.

∙If there is still some paper in the feeder, you must first remove it, put it together with the new paper and then insert the stack in the feeder.

Fig. 2-4 Opening the Feeder and

Loading Paper or Envelopes in the Feeder

✒Note

If you load envelopes in the feeder, make sure they are inserted in the direction shown above.

CHAPTER 2 –5