Brother HL-760 Series Additional Memory, Minimum Memory Recommendation including resident memory

USER’S GUIDE

Additional Memory

This printer has 1 Mbyte of standard memory and a slot for optional additional memory. The memory can be expanded up to 33 Mbytes by installing a commercially available single in-line memory module (SIMM).

Additional memory is useful and may be necessary if you are using the Page Protection function. (For details about Page Protection, see the previous page.)

Minimum Memory Recommendation (including resident memory)

Page Protect = AUTO or Off

	300 dpi	600 dpi
Letter/A4	1 MB	1 MB
Legal	1 MB	1 MB
Page Protect = Letter, A4, or Legal
	300 dpi	600 dpi
Letter/A4	2 MB	6 MB
Legal	3 MB	6 MB

The following type of SIMM are recommended and can be installed:

∙	1 Mbytes	HITACHI HB56D25632B-6A, -7A
∙	2 Mbytes	HITACHI HB56D51232B-6A, -7A
∙	4 Mbytes	HITACHI HB56A132BV-7A, -7AL, -7B, -7BL
∙	8 Mbytes	HITACHI HB56A232BT-7A, -7AL, -7B, -7BL
∙	16 Mbytes	HITACHI HB56A432BR-6A, -7A
∙	32 Mbytes	HITACHI HB56A832BS-6A, -7A

This printer can accept the following types of SIMMS with the following specifications:

Speed	60 nsec - 80 nsec
Pin Type	72 pin
Height	35.00 mm (1.38”) or less

Output32 bit or 36 bit

✒Note

This printer can also support DIB graphics with a resolution of 1200 x 600 dpi under Windows 95/Windows 3.1 with the supplied printer driver. We recommend to expand the printer memory to avoid any memory full error.

CHAPTER 4 –6