Brother PT-97OOPC manual LED display on printer, Lamp condition Condition Remedy, Not lit

LED display

The condition of the printer can be determined by LED display on printer or USB Direct Interface (PT- 9800PCN only).

■LED display on printer

Lamp condition
			Condition		Remedy
Power button	STATUS lamp
(green)	(red)
Lit	Not lit	Printer standby condition		—
Flashing	Not lit	Receiving data		—
		During the printer receiving data
		1)	No tape cassette	1)	Install the tape cassette and
					close the tape compartment
					cover.
Flashing	Lit	2)	Tape compartment cover is	2)	Close the cover.
			open.
		3)	Incompatible tape cassette	3)	Install the correct tape cassette
					and close the tape compartment
					cover.
		During the printer standby
		1)	No tape cassette	1)	Install the tape cassette and
					close the tape compartment
					cover.
Lit	Lit	2)	Tape compartment cover is	2)	Close the cover.
			open.
		3)	Incompatible tape cassette	3)	Install the correct tape cassette
					and close the tape compartment
					cover.
		During printing
		1)	No tape cassette	1)	Install the tape cassette and
					close the tape compartment
					cover.
		2)	Tape compartment cover is	2)	Close the cover.
			open.
		3)	Incorrect tape cassette	3)	Install the correct tape cassette
					and close the tape compartment
Lit	Flashing				cover.
		4)	Incompatible tape cassette	4)	Install the correct tape cassette
					and close the tape compartment
					cover.
				Install a tape cassette containing
		Empty tape cassette		tape and close the tape
				compartment cover.
		Transmission error		Press the power button on the front
				of the printer.

12