Brother PT-97OOPC manual Appendix, Scan the Basic settings barcode, Barcode printing

Appendix

General procedure for the BTP (Barcode Template Print) function

The general procedure for using the BTP (Barcode Template Print) function is described below. For details on specifying the various settings, refer to “BTP (Barcode Template Print) function” (→ P.37).

1Use P-touch Editor 5.0 to create a template, and then transfer it to the printer.

2Connect the barcode reader to the printer.

3

4

5

Scan the “P-touch template command” barcode.

This allows the settings to be specified or clears the previous settings.

Scan the “Basic settings” barcode.

Specify the cut method and the number of copies to be printed.

Specify the appropriate settings (A, B or C).

A.Preset template printing

1.Scan the “Preset template number” barcode.

B.Barcode printing

1.Scan the “Select template” barcode, then the barcodes under “For entering numbers”. 2.Scan the barcode whose data is to be used or copied.

3.Scan the “Begin printing” barcode.

C.Database-assisted label printing

1.Scan the “Select template” barcode, then the barcodes under “For entering numbers”. 2.Scan the key barcode for the database data to be used.

3.Scan the “Delimiter” barcode. 4.Scan the “Begin printing” barcode.

6The specified label is printed.

50