Brother PT-97OOPC manual Double click P-touch Editor 5.0 Installer.mpkg, For Mac OS X 10.3.9

2Double click “Brother PT-9700PC Driver.pkg” in “Mac OS X” folder. The Driver Installer starts up. Follow the on-screen instructions.

3After the installation is completed and the screen shown below is displayed, click [Close].

The installation of printer driver is completed. Next, install the P-touch Editor 5.0.

4Double click “P-touch Editor 5.0 Installer.mpkg”.

The P-touch Editor 5.0 Installer starts up. Follow the on-screen instructions.

5When the installation is completed and the message “Click Restart to finish installing the software” is displayed, click [Restart].

The Macintosh® is restarted.

The installation of software is completed.

6After restarting the computer, connect your printer to the computer by using the USB cable, and then turn on the printer.

USB port

USB cable

AC adapter jack

AC adapter

Note

●If you are connecting the printer to Macintosh® via a USB hub, it may not be

detected correctly. If so, connect the printer directly to the USB port on Macintosh®.

7For Mac OS® X 10.3.9 - 10.4.x

Double click the drive where Mac OS® X is installed, and click in order of “Applications” - “Utilities” - “Printer Setup Utility”.

For Mac OS® X 10.5.x - 10.6

Click in order of “Apple menu” - “System Preferences”, and click “Print & Fax”.

8For Mac OS® X 10.3.9 - 10.4.x

Click [Add] and choose USB at the top of the screen.

Choose “PT-9700PC” from the list and click [Add] again to add the printer to the “Printer List”.

For Mac OS® X 10.5.x - 10.6

Choose “Brother PT-9700PC” from the list

and click [Add] / to add the printer to the “Printer List” / “Print & Fax”.

9When the screen returns to “Printer List” / “Print & Fax” screen, check that “PT- 9700PC/Brother PT-9700PC” is added, and close the “Printer List” / “Print & Fax” screen.

Now you can use the printer.

21