STYLE FUNCTION
You can choose from nine different character styles to apply to your text.
☞Characters printed using the smaller sizes may be difficult to read if certain style settings (e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL | I+BOLD (italic & bold) |
BOLD | I+OUTLINE (italic & outline) |
OUTLINE | I+SHADOW (italic & shadow) |
SHADOW | VERTICAL |
ITALIC |
|
The default style setting is NORMAL. The style indicator at the bottom right of the display shows the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
Style
1While holding down , press once, and keep held down to dis- play the current style setting.
Style
2While still holding down , continue pressing until the desired style set- ting is displayed.
☞The current style setting is shown by the style indicator at the bottom right of the display.
3Release to apply the selected style setting to the entire text.
EXAMPLE
To select the I+SHADOW style setting:
1 While | holding down | , |
|
|
| Style |
|
| Auto |
|
|
|
| |
press | once, and | keep | S T Y L E | Length |
| held down. |
| N O R M A L | Underline |
|
| Frame |
Font 1 Font 2
55