TAPE MARGIN FUNCTION
The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL
(1 1/24” (25 mm margins))
NONE
(no margins)
NARROW (1/6” (4 mm margins))
HALF
(1/2” (12 mm margins))
☞After printing a label using the NONE tape margin setting, hold down 
and
press | Feed | once to feed the tape before pushing down on the tape cutter lever |
|
to cut it. Otherwise some of the printed characters may be cut off.
After printing using the NARROW and HALF tape margin settings, push down on the tape cutter lever to cut off the label, then use scissors to cut along the printed dots (:) to center the text within the label.
To change the tape margin setting:
Tape
1While holding down 
, press 
once, and keep 
held down to dis- play the current tape margin setting.
Tape
2While still holding down 
, continue pressing 
until the desired tape margin setting is displayed.
3Release 
to apply the selected tape margin setting to the entire text.
63