Electrolux EQBL100AS Maintenance, Electrolux integrated barbecue maintenance/troubleshooting

electrolux integrated barbecue maintenance/troubleshooting 11

Maintenance Troubleshooting

The ignition system

To change the battery unscrew the cover. Lift out the spring and battery. Replace with a new AA battery and replace the cover. Do not over-tighten the screw cover as this may distort the trim panel. Test by depressing the knob and an audible ‘clicking’ sound should be heard.

NOTE

Ensure that the battery has been placed in the correct orientation.

Air vents

The mounting enclosure air vents should be checked prior to each use, to ensure they are clear of any obstructions that may affect the free flow of air.

Stainless steel burners "URNERSåSHOULDåBEåCHECKEDåATåLEASTåONCEåPERåYEARåANDå cleaned as necessary. Inspect burners to ensure no residues have been deposited and gas ports are clear.

problem	possible cause	remedy
"ARBECUEåWONTå	No gas	Check isolation valve
light		is ON
		Gas bottle empty – refill
		or change gas bottle
	Ignition system	Check battery – should
	not working	hear a clicking noise
		when the knob is
		depressed
		Replace battery
		Manually light the
		barbecue
	Ignition electrode	Gently clean and dry
	wet or dirty	electrode ensuring
		position is correct
Excess smoke	Gas valve set too	Turn gas valves down or
being emitted	high	turn off selected burners
from the cooking
area
Smell of gas	Gas leak	Turn off gas at the
DO NOT		isolation valves
		Check for leaks, tighten
ATTEMPT TO
		joints
LIGHT THE
APPLIANCE		If problem persists call
		Electrolux Service