Electrolux EQBL100AS user manual Gas requirements Fitting the slimline lid or roasting hood

8 gas requirements/setting up the barbecue/fitting the lid or hood electrolux integrated barbecue

Gas requirements		Fitting the slimline lid or roasting hood
Natural Gas requirements		Fitting of slimline lid
såå	4HEåENCLOSUREåMUSTåBEåCONSTRUCTEDåSOåTHATåACCESSåCANå	så 5NPACKåTHEåSLIMLINEåLID
	be gained to the Natural Gas regulator at all times.	så	2EMOVEåSIDEåSCREWSåFROMåBARBECUEåTRIMåSURROUNDåUSINGå
så	&ORå.ATURALå'ASåTHEåGASåSUPPLYåISåREQUIREDåTOåBEå		allen key supplied.
	connected to 1.2m flexible hose supplied and therefore	så	&ITåBRACKETSåTOåTRIMåSURROUNDåWITHåTHEåSAMEåSCREWS
	must be located within this distance	så	&ITåLIDåTOåBRACKETS
så	4HEåmEXIBLEåHOSEåHASåAåQUICKåCONNECTåGASåCOUPLINGå4HEå
	corresponding mating fitting will be required at the gas
	supply end.
så	&ORåPIPEåSIZINGåREQUIREMENTSåFORåSUPPLYåPIPEåREFERåTOå
	AS5601.
Universal LPG Requirements

warning

så )FåANå,0'åBOTTLEåISåTOåBEåSTOREDåINåTHEåENCLOSUREå under the barbecue unit, it must be isolated from the barbecue unit with a non-combustible panel.

The enclosure must comply with the requirements of AS5601.

så !3åVENTILATIONåREQUIREMENTSåFORåCYLINDERåSTORAGEåAREå Where of sheet metal or similar impervious construction there shall be ventilation openings at the top and bottom of the enclosure or recess, each opening providing a free area of at least 200cm2 for every cylinder enclosed.

cut hole in non- combustible barrier for hose only

210mm

front of enclosure removed for clarity

non-combustible barrier required

at least 30mm clearanceunder barbecue between bottom of

barbecue and barrier

Setting up the barbecue

Setting up the barbecue in mounting enclosure

så !FTERåTHEåENCLOSUREåHASåBEENåCONSTRUCTEDåASåDESCRIBEDå on page 6, position the assembled barbecue into the cut-out hole.

så #HECKåTHATåTHEåBARBECUEåISåLEVELåANDåISålRMLYåSUPPORTED så #ONNECTåTOåGASåSUPPLYå5NIVERSALå,0'åORå.ATURALå'AS å

and leak test.

så &ORålTMENTåOFåTHEåSLIMLINEåLIDåORåROASTINGåHOODåSEEåRIGHT 

Fitting of roasting hood

så 5NPACKåTHEåROASTINGåHOOD

så 2EMOVEåSIDEåANDåREARåSCREWSåFROMåBARBECUEåTRIMå surround using allen key supplied.

important

så $UEåTOåTHEåSIZEåOFåTHEåROASTINGåHOODåITåISåRECOMMENDEDå that two people place the roasting hood into position.

så 7HENålTTINGåROASTINGåHOODåASSEMBLYåTAKEåPARTICULARå care to avoid scratching of the external trim.

så /NCEåINåPOSITIONålXåHOODåASSEMBLYåTOåTRIMåSURROUNDå with same screws.