Electrolux EQBL100AS user manual Gas speciﬁcations, Gas connection detail

Page 7

electrolux integrated barbecue gas speciﬁcations/natural gas installation 3

Gas speciﬁcations

Natural Gas installation

gas type	natural gas	universal LPG
Maximum gas consumption	50 MJ/hr	50 MJ/hr
Injector oriﬁce diameter	1.75mm	0.95mm
Number of injectors	4	4
Regulator pressure	1.00 kPa	2.75 kPa

NOTES

såå 4HISåAPPLIANCEå-534åBEåINSTALLEDåANDåSERVICEDåONLYåBYå a qualiﬁed licensed person.

så 4HISåPRODUCTåISåINTENDEDåFORåOUTDOORåUSEåONLY

så 4HISåPRODUCTåMUSTåBEåINSTALLEDåASåPERåTHEåINSTRUCTIONSå

which requires the installation of venting to enable the barbecue to operate correctly. Failure to provide adequate ventilation for supply of air to the appliance may result in poor burner performance or excessive heat build-up within the mounting enclosure.

så 6ENTILATIONåHOLESåINåTHEåUNITåMUSTåNOTåBEåOBSCUREDåBYå the installation.

Preparing the unit for Natural Gas installation

This barbecue is supplied set up for Natural Gas and is labelled accordingly. A Universal LPG conversion kit is included if required. Conversion of this unit to Universal LPG must be carried out by a qualiﬁed licensed person.

A Certiﬁcate of Compliance must be issued to the owner on completion of the installation and conversion.

Fit Natural Gas installation pipe to the barbecue gas inlet to enable access to the regulator in the installed position. When tightening the regulator or any other connection do not over-tighten.

1. Fitting the Natural Gas installation pipe

åsåå&ITåTHEåPIPEåENSURINGåTHEåBLUEåSEALINGåWASHERåISåINå place. Do not over-tighten.

2. Fitting the regulator

åså &ITåTHEåREGULATORåENSURINGåTHEåBLUEåSEALINGåWASHERå is in place and the arrow indicating gas ﬂow is

correct. Do not over-tighten. 3. Fit the hose

åså !PPLYåTHREADåTAPEåORåSEALANTåTOåTHEåMALEåTHREADåONå the hose and screw into the regulator. Do not over- tighten.

Gas connection detail

137mm

408mm

46mm

barbecue gas inlet

sealing washer

Natural Gas installation pipe

sealing washer

regulator – ensure arrow is pointing in the right direction

hose with tapered thread – thread tape required

4. Fit to mains

åså #ONNECTåTHEåBAYONETåENDåTOåMAINS

Preparing the unit for Natural Gas connection to mains

For Natural Gas connection a bayonet connection point should be installed by a licensed gas ﬁtter prior to installing the barbecue unit.

Image 7

Contents EQBL100AS and EQBH100AS Congratulations ContentsInformation on disposal for users Integrated barbecue with roasting hood Integrated barbecue with slimline lidIi product description bYjhebkndjhWjZXWhXYk BYjhebkndjhWjZXWhXYk parts Tools you will need for assemblyContents of your barbecue pack PartsMeanings of the symbols used in this manual are shown below Important safety instructionsAssembling electrolux integrated barbecue Assembling the barbecueRemove all components from box Preparing the unit for Natural Gas connection to mains Preparing the unit for Natural Gas installationGas speciﬁcations Gas connection detailUniversal LPG installation electrolux integrated barbecue Universal LPG installationGas bottle safety information Leak test procedure Choosing a location Installation warningsIsland style installation Installing in a bench with a splashbackDiagram Electrolux integrated barbecue installation instructionsGas requirements Fitting the slimline lid or roasting hood Setting up the barbecueOperating instructions Options for conﬁguration of hotplates and grillsSpecial note on tea staining Cleaning and careCleaning and care electrolux integrated barbecue Cleaning the Oil ReservoirsAir vents MaintenanceElectrolux integrated barbecue maintenance/troubleshooting Ignition systemWarranty electrolux integrated barbecue WarrantyPage BYjhebknecFheZkYji7kijhWbW