2 assembling electrolux integrated barbecue
Assembling the barbecue
1.Remove all components from box.
2.Attach heat shield to rear of unit by inserting the three top tabs into the rear holes and sliding the shield down.
3.Position flame tamers into desired locations (under where grill sections will be fitted) and fix back edge of the flame tamer into rear of barbecue body.
5.Place hotplate and grill sections into desired positions ensuring that the flame tamers are under grill sections NOTE ensure that grill assemblies are orientated correctly so that the surface of the grill is sloping forward to allow oil to drain into oil reservoirs.
assembled grill
back
front
6. After installation in bench, attach slimline lid or roasting hood as described in “Fitting the slimline lid or roasting hood” section of this manual.
4. Fit left and right hand oil reservoirs at front of barbecue.