TELNET
Once you have configured the initial IP address or set your PC to the same network as the FaxReceiver, you can use Telnet to configure the parameters.
BENEFITS OF USING TELNET:
1)You can use HyperTerminal or any other telnet utility to perform the setup procedures.
2)The FaxReceiver does not have to be on the same physical network as long as you have a virtual connection to the network that it is attached to.
3)There are additional debug features available in Telnet that are not available in the NPMP client.
This guide covers using the telnet utility that comes with Windows.
a.Click on the Windows 
button in the lower left, and select Run…
b.Type in CMD and press the Enter key. This will take you to the command prompt shown below.
Copyright 2006 Ringdale User Manual, | Page 20 of 49 |