Menu Map
The menu driven setup allows the following parameters to be set up:
MENU ITEM | # CHARS |
1)Setup IP
2)Setup SMTP Mailserver
3)Setup Fax
4)Reboot after quitting
5) | Change Telnet port | 4 |
6) | Change Telnet session | 2 |
P) Change Telnet password | 253 | |
!) Redirect debug to this screen |
| |
| Unit IP settings |
|
DEFAULT | FORMAT | REQD? |
| 1 |
|
| 2 |
|
| 3 |
|
(Disabled) | toggle |
|
23 | 23 | Y |
2 | (0 to 50 minutes) | N |
|
| N |
| toggle |
|
1) | Unit IP address | 16 | 11.22.33.44 | xxx.xxx.xxx.xxx | Y |
2) | Subnet Mask | 16 | 255.255.255.0 | xxx.xxx.xxx.xxx | Y |
3) | DNS Address 1 | 16 | 0.0.0.0 | xxx.xxx.xxx.xxx | N |
4) | DNS Address 2 | 16 | 0.0.0.0 | xxx.xxx.xxx.xxx | N |
5) | Unit Gateway address | 16 | 0.0.0.0 | xxx.xxx.xxx.xxx | Y |
6) | DHCP/RARP |
| Disabled | toggle | N |
7) | Timeserver 1 address | 16 | 192.043.244.018 | xxx.xxx.xxx.xxx | Y |
8) | Timeserver 2 address | 16 | 000.000.000.000 | xxx.xxx.xxx.xxx | N |
9) | Timeserver 3 address | 16 | 000.000.000.000 | xxx.xxx.xxx.xxx | N |
| Unit Email settings |
|
|
|
|
1) | Mailserver SMTP address | 58 | 0.0.0.0 | xxx.xxx.xxx.xxx | Y |
|
|
|
| or |
|
|
|
|
| URL. |
|
2) | Mailserver SMTP IP port | 4 | 25 | ### | Y |
3) | Mailserver login name | 58 |
| name@company.com | Y |
4) | Mailserver login password | 58 |
| password99 | Y |
5) | Destination Email address | 80 *1 | fax@null | name2@company.com | Y |
6) | Reply email address | 58 | fax@null | name@company.com |
|
7) | Reply Name | 58 | Fax | Any text up to 58 char |
|
6)Check Mailserver connection
Unit Fax settings
1) | Fax reply I.D. | 20 | Black Box (R) Fax | Black Box (R) Fax | N |
2) | Fax number | 20 | <phone number> | N | |
3) | Fax location | 28 | <location> | Lawrence, PA | N |
4) Company Name | 28 | <company> | Black Box | N | |
5) | Scaling Percentage | 3 | 100 | Y | |
6) | Number of rings before answer | 2 | 1 | Y | |
7) | Signal Transmission Errors |
| Yes | Toggle | N |
8) | Time Zone Offset | 3 | +0 | Y | |
9) | Daylight Saving |
| (Off) | toggle | N |
*1 For FaxConfig enter each address on a separate line. For Telnet, separate with commas or semicolons.
Copyright 2006 Black Box | Page 5 of 49 |