Brother MFC 8700, MFC 8600 Setting Up Groups for Broadcasting, Select ONE-TOUCH, Setup Groupgo

1 for Group 1.)

Setting Up Groups for Broadcasting

Groups allow you to send the same fax message to many fax numbers by pressing only one One Touch Group key (and Start ). First, you’ll need to store each fax number as a One Touch or Speed Dial number. Then, you can combine them into a Group. Each Group uses up a One Touch key. Finally, you can have up to six small Groups, or you can assign up to 131 numbers to one large Group.

You can include up to 31 One Touch keys, and up to 100 Speed Dial numbers. If you broadcast to more than the maximum locations available, you will be unable to set up transmissions using Dual Access and the Timer.

(See Storing One Touch Dial Numbers, page 7-1 and Storing Speed Dial Numbers, page 7-2.)

1For the FAX, press Function , 6 , 3 . For the MFC, press Function , 1 , 6 , 3 .

2 Select a One Touch key where you	SELECT		ONE-TOUCH
wish to store the Group number.
(For example, press One Touch
key 02 for Group 1.)
3 Use the dial pad to enter the Group number	SETUP	GROUP:GO￿
and press Set .	ENTER	&	SET

(For example, press

4To include One Touch or Speed Dial numbers in the Group, enter them as if you were dialing. For example, for One Touch key 05 , press One Touch

key 05 . For Speed Dial location 09,		G01:*O5#O9￿
press Speed Dial , then press 0 , 9	on the
dial pad. The display shows	05, #09.	ENTER & SET

5When you’re finished adding numbers, press Set .

6 Use the dial pad and the chart on page 4-2	NAME:￿
to enter a name for the group and press Set .	ENTER & SET
(For example, NEW CLIENTS)

7Press Stop to exit.

You can print a list of all One Touch and Speed Dial numbers. (See Chapter 10, Printing Reports.)

If you lose electrical power, numbers stored in memory will not be lost.

(See Broadcasting, page 6-11.)

S E T U P A U T O D I A L N U M B E R S 7 - 3