Alliance Laundry Systems TLW12CTLW12C manual Connecting Hoses, Risers

Page 10

Installation

Connecting Hoses

Insert rubber washers and filter screens (from accessories bag) in water fill hose couplings (two hoses supplied with washer). Connect fill hoses to water supply faucets. Then connect the hoses to the hot and cold valve connections at the rear of the washer. Refer to Figure 4. Thread hose couplings onto valve connections finger tight. Then turn 1/4 turn with pliers.

IMPORTANT: DO NOT cross thread or overtighten couplings.

1

 

3

4

 

 

 

COLD

 

 

 

HOT

2

 

 

 

 

C

 

 

 

H

7

5

6

TLW1988N

1Filter Screen (Screen must be facing outward)

2Fill Hose

3Rubber Washer (Plain)

4Cold Water Connection

5Hot Water Connection

6Hose Coupling

7Faucet

Figure 4

IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to.

All hoses should be checked on a monthly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years.

IMPORTANT: Turn off water supply faucets after check-out and demonstration. Owner should turn off water supply whenever there will be an extended period of non-use.

NOTE: Longer fill hoses are available (as optional equipment at extra cost) if the hoses (supplied with the washer) are not long enough for the installation. Order hoses as follows:

No. 20617 Fill Hose (8 feet) (2.44 m)

No. 20618 Fill Hose (10 feet) (3.05 m)

Risers

Risers (or air cushions) may have to be installed if the pipes knock or pound when flow of water stops. The risers are more efficient when installed as close as possible to the water supply faucets. Refer to Figure 5.

1

2

W005I

W005I

1Risers (Air cushions)

2Water Supply Faucets

Figure 5

8

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

202068

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Automatic Washers Page W022 Contents Explanation of Safety Messages Safety InformationImportant Safety Instructions Safety Information Installation Dimensions and SpecificationsTools Installing the WasherBefore You Start Remove the Shipping Brace and Shipping PlugConnect Fill Hoses Wipe Out Inside of WashtubWater Supply Requirements Connecting Hoses RisersConnect Drain Hose to Drain Receptacle High Standpipe InstallationDrain Facilities Low Standpipe Installation Position and Level the WasherPlug In the Washer Electrical RequirementsGrounding Instructions Check Lid SwitchCheck Installation Add Water to the WasherMeter Case VendingModels Prepped for Card Reader Additional Washer Security Coin Models OnlyAdd Detergent OperationOperation Instruction Load LaundrySelect Cycle Type/ Soil Level Set Wash TemperatureSet Fabric Selector Insert Money or CardTo Insert Card Indicator LightsStart Washer User-Maintenance Instructions MaintenanceMotor Overload Protector Troubleshooting Washer Symptom Possible Cause/SolutionTroubleshooting Contact Information Page Page Fast Track for Installing the Washer Installer ChecklistRefer to the manual for more detailed information

TLW12CTLW12C specifications

Alliance Laundry Systems TLW12CTLW12C is a highly efficient and robust washer-extractor that exemplifies modern engineering in commercial laundry equipment. Designed primarily for high-demand settings such as laundromats, hotels, and large institutions, this model stands out due to its advanced features and exceptional performance.

One of the prominent features of the TLW12CTLW12C is its large capacity, allowing users to process significant loads of laundry in a single cycle. With a drum that can accommodate up to 12 kilograms of laundry, this washer-extractor ensures fewer loads and enhanced productivity, which can greatly benefit businesses aiming to optimize their operations.

The TLW12CTLW12C is equipped with a powerful motor that delivers high extraction speeds, leading to reduced moisture content in the laundry after each cycle. This efficiency translates into shorter drying times, ultimately conserving energy and reducing operational costs. The machine's design also features a robust suspension system that minimizes vibrations, ensuring quiet and stable operation even at full load.

In terms of technology and user control, the TLW12CTLW12C boasts a user-friendly digital control interface, allowing operators to easily select from a wide range of programmable wash cycles tailored for various fabrics and soil levels. This versatility is essential for achieving optimal cleaning results across different textile types, from delicate items to heavily soiled linens.

Another significant characteristic of the TLW12CTLW12C is its energy efficiency. This model is designed with advanced water and energy-saving technologies that not only reduce consumption but also promote environmentally-friendly practices. Additionally, it features automatic water level control and temperature regulation, ensuring consistent wash quality while further minimizing resource usage.

Durability is a pivotal feature of the TLW12CTLW12C, which is constructed from high-quality materials intended to withstand the rigors of commercial usage. The stainless-steel drum and outer construction are resistant to rust and corrosion, ensuring a long lifespan with minimal maintenance.

Overall, the Alliance Laundry Systems TLW12CTLW12C is designed to meet the demanding needs of commercial laundry operations with its blend of capacity, efficiency, flexibility, and durability. Its innovative features make it a worthy investment for those seeking reliable performance in laundry management.
Top Page Image Contents