Alliance Laundry Systems TLW12CTLW12C manual Wipe Out Inside of Washtub, Connect Fill Hoses

Page 9

Step 2: Wipe Out Inside of Washtub

Prior to first wash, use an all purpose cleaner or a detergent and water solution and a damp cloth to remove shipping dust from inside of washtub.

TLW2099N

Figure 3

Step 3: Connect Fill Hoses

WARNING

Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period and before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable. Do not smoke or use an open flame during this time.

W029

Installation

Water Supply Requirements

Water supply faucets must fit standard 3/4 inch (19.1 mm) female garden hose couplings. DO NOT USE SLIP-ON OR CLAMP-ON CONNECTIONS.

NOTE: Water supply faucets should be readily accessible to permit turning them off when washer is not being used.

Recommended cold water temperature is 50° to 75° Fahrenheit (10° to 24° Celsius). Recommended maximum hot water temperature is 125° Fahrenheit (51° Celsius). Warm water is a mixture of hot and cold water. Warm water temperature is dependent upon the water temperature and the pressure of both the hot and cold water supply lines.

WARNING

To prevent personal injury, avoid contact with inlet water temperatures higher than 125° Fahrenheit (51° Celsius) and hot surfaces.

W748

Pressure must be a minimum of 20 to a maximum of 120 pounds per square inch (138 to 827 kPa) static pressure measured at the faucet.

NOTE: Water pressure under 20 pounds per square inch (138 kPa) will cause an extended fill time in the washer.

Turn on the water supply faucets and flush the lines for approximately two minutes to remove any foreign materials that could clog the screens in the water mixing valve. (This is especially important when installing your washer in a newly constructed or renovated building.)

202068

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Automatic Washers Page W022 Contents Safety Information Explanation of Safety MessagesImportant Safety Instructions Safety Information Dimensions and Specifications InstallationBefore You Start Installing the WasherTools Remove the Shipping Brace and Shipping PlugWipe Out Inside of Washtub Connect Fill HosesWater Supply Requirements Risers Connecting HosesHigh Standpipe Installation Connect Drain Hose to Drain ReceptacleDrain Facilities Position and Level the Washer Low Standpipe InstallationElectrical Requirements Plug In the WasherCheck Installation Check Lid SwitchGrounding Instructions Add Water to the WasherVending Meter CaseModels Prepped for Card Reader Coin Models Only Additional Washer SecurityOperation Instruction OperationAdd Detergent Load LaundrySet Fabric Selector Set Wash TemperatureSelect Cycle Type/ Soil Level Insert Money or CardIndicator Lights To Insert CardStart Washer Maintenance User-Maintenance InstructionsMotor Overload Protector Washer Symptom Possible Cause/Solution TroubleshootingTroubleshooting Contact Information Page Page Installer Checklist Fast Track for Installing the WasherRefer to the manual for more detailed information

TLW12CTLW12C specifications

Alliance Laundry Systems TLW12CTLW12C is a highly efficient and robust washer-extractor that exemplifies modern engineering in commercial laundry equipment. Designed primarily for high-demand settings such as laundromats, hotels, and large institutions, this model stands out due to its advanced features and exceptional performance.

One of the prominent features of the TLW12CTLW12C is its large capacity, allowing users to process significant loads of laundry in a single cycle. With a drum that can accommodate up to 12 kilograms of laundry, this washer-extractor ensures fewer loads and enhanced productivity, which can greatly benefit businesses aiming to optimize their operations.

The TLW12CTLW12C is equipped with a powerful motor that delivers high extraction speeds, leading to reduced moisture content in the laundry after each cycle. This efficiency translates into shorter drying times, ultimately conserving energy and reducing operational costs. The machine's design also features a robust suspension system that minimizes vibrations, ensuring quiet and stable operation even at full load.

In terms of technology and user control, the TLW12CTLW12C boasts a user-friendly digital control interface, allowing operators to easily select from a wide range of programmable wash cycles tailored for various fabrics and soil levels. This versatility is essential for achieving optimal cleaning results across different textile types, from delicate items to heavily soiled linens.

Another significant characteristic of the TLW12CTLW12C is its energy efficiency. This model is designed with advanced water and energy-saving technologies that not only reduce consumption but also promote environmentally-friendly practices. Additionally, it features automatic water level control and temperature regulation, ensuring consistent wash quality while further minimizing resource usage.

Durability is a pivotal feature of the TLW12CTLW12C, which is constructed from high-quality materials intended to withstand the rigors of commercial usage. The stainless-steel drum and outer construction are resistant to rust and corrosion, ensuring a long lifespan with minimal maintenance.

Overall, the Alliance Laundry Systems TLW12CTLW12C is designed to meet the demanding needs of commercial laundry operations with its blend of capacity, efficiency, flexibility, and durability. Its innovative features make it a worthy investment for those seeking reliable performance in laundry management.
Top Page Image Contents