Alliance Laundry Systems TLW12CTLW12C manual Troubleshooting

Page 22

Troubleshooting

Washer Symptom

Possible Cause/Solution

 

 

Won’t Drain

• Make sure drain hose is not kinked or twisted.

 

• Make sure drain hose is not clogged.

 

• Make sure drain receptacle is not clogged.

 

• Refer to the Installation section to make sure that the drain hose has been properly

 

installed.

 

 

Water Leaks

• Check that fill hoses are properly installed on the faucets and the washer’s water mixing

 

valve.

 

• Replace the fill hoses every five years.

 

• Make sure drain receptacle is not clogged.

 

• Check laundry room plumbing.

 

• Laundry load may be oversudsing or overloaded. Use less detergent (or low-sudsing

 

detergent) and proper load sizes.

 

 

Is Noisy

• Wash load may be unbalanced. Open lid and redistribute the load.

 

• Make sure washer is level. Uneven leveling can cause vibration.

 

• A newly installed washer may make a knocking sound if the machine has been in storage.

 

The belt may have settled. Run washer through 4-5 cycles to loosen belt. Washer

 

operation will not be affected.

 

 

Load is too Wet

• Wash load may be unbalanced. Open lid and redistribute the load.

 

• Load is too small. Add items to make full load.

 

 

Wrong Water

• Make sure that the controls are properly set.

Temperature

• Check fill hoses. Make sure hot faucet hose is connected to hot mixing valve (indicated

 

with “H” on the valve bracket) and cold faucet is connected to cold mixing valve

 

(indicated with “C” on the valve bracket).

 

• Make sure laundry room water heater is adjusted properly.

 

 

20

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

202068

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Automatic Washers Page W022 Contents Explanation of Safety Messages Safety InformationImportant Safety Instructions Safety Information Installation Dimensions and SpecificationsTools Installing the WasherBefore You Start Remove the Shipping Brace and Shipping PlugConnect Fill Hoses Wipe Out Inside of WashtubWater Supply Requirements Connecting Hoses RisersConnect Drain Hose to Drain Receptacle High Standpipe InstallationDrain Facilities Low Standpipe Installation Position and Level the WasherPlug In the Washer Electrical RequirementsGrounding Instructions Check Lid SwitchCheck Installation Add Water to the WasherMeter Case VendingModels Prepped for Card Reader Additional Washer Security Coin Models OnlyAdd Detergent OperationOperation Instruction Load LaundrySelect Cycle Type/ Soil Level Set Wash TemperatureSet Fabric Selector Insert Money or CardTo Insert Card Indicator LightsStart Washer User-Maintenance Instructions MaintenanceMotor Overload Protector Troubleshooting Washer Symptom Possible Cause/SolutionTroubleshooting Contact Information Page Page Fast Track for Installing the Washer Installer ChecklistRefer to the manual for more detailed information

TLW12CTLW12C specifications

Alliance Laundry Systems TLW12CTLW12C is a highly efficient and robust washer-extractor that exemplifies modern engineering in commercial laundry equipment. Designed primarily for high-demand settings such as laundromats, hotels, and large institutions, this model stands out due to its advanced features and exceptional performance.

One of the prominent features of the TLW12CTLW12C is its large capacity, allowing users to process significant loads of laundry in a single cycle. With a drum that can accommodate up to 12 kilograms of laundry, this washer-extractor ensures fewer loads and enhanced productivity, which can greatly benefit businesses aiming to optimize their operations.

The TLW12CTLW12C is equipped with a powerful motor that delivers high extraction speeds, leading to reduced moisture content in the laundry after each cycle. This efficiency translates into shorter drying times, ultimately conserving energy and reducing operational costs. The machine's design also features a robust suspension system that minimizes vibrations, ensuring quiet and stable operation even at full load.

In terms of technology and user control, the TLW12CTLW12C boasts a user-friendly digital control interface, allowing operators to easily select from a wide range of programmable wash cycles tailored for various fabrics and soil levels. This versatility is essential for achieving optimal cleaning results across different textile types, from delicate items to heavily soiled linens.

Another significant characteristic of the TLW12CTLW12C is its energy efficiency. This model is designed with advanced water and energy-saving technologies that not only reduce consumption but also promote environmentally-friendly practices. Additionally, it features automatic water level control and temperature regulation, ensuring consistent wash quality while further minimizing resource usage.

Durability is a pivotal feature of the TLW12CTLW12C, which is constructed from high-quality materials intended to withstand the rigors of commercial usage. The stainless-steel drum and outer construction are resistant to rust and corrosion, ensuring a long lifespan with minimal maintenance.

Overall, the Alliance Laundry Systems TLW12CTLW12C is designed to meet the demanding needs of commercial laundry operations with its blend of capacity, efficiency, flexibility, and durability. Its innovative features make it a worthy investment for those seeking reliable performance in laundry management.
Top Page Image Contents