Linksys EtherFast® Series
11.Optional: Choose the Access Control tab. Ensure that
12.Click the OK button. Your system may or may not ask you for your Windows 95
13.Once Windows has copied the necessary files, the System Settings Change window appears. Remove all disks from your PC and click on Yes to restart your PC. If you don't see this window, simply shut down Windows 95 and restart your PC. Remember to remove the installation disk and
10/100 Network In a Box
14.A Logon window will appear, requiring you to enter a username and pass- word. Make up a username and password and click OK. Do not click the ESC or Cancel buttons, or you won't be able to log onto the network. If the a logon does not appear or if it does not allow you to log on, refer to problems 3 and 4 in the Troubleshooting section on page 44.
15.Once you are at the Windows 95 desktop,
•If you can see your computer along with all the other computers on the network in Network Neighborhood, then the Windows 95 net- work configuration is complete. Continue with Sharing Your Files and Printers on page 49 if you want data from your PC to be avail- able to others on the network. You may stop here, however, if you wish to configure File and Printer Sharing at a later time.
•If you don't see anything at all in Network Neighborhood, press the F5 key on your keyboard a few times to refresh the screen. If that doesn’t work, go to problem 8 of the Troubleshooting section on page 45.
•If you only see your own computer in Network Neighborhood, skip to problem 6 of the Troubleshooting section on page 45.
•If you see all computers on the network except yours press the F5 key a few times. If, after a minute or so, you still can’t see your own PC, see problem 7 on page 45 of the Troubleshooting section.
•If you only see computers that are running the same operating system as you and you don’t see any others, go to problem 10 on page 46.
24 | 25 |