Linksys EtherFast® Series
The EtherFast 10/100 5-Port Workgroup Hub
Your network revolves around your hub. You can not connect your computers directly to one another. You must connect them through your hub.
The Hub’s LEDs |
|
PWR | The Power LED will illuminate when the the hub is receiv- |
| ing power. |
100The 100 LED will illuminate if the port is operating at
(per port) | 100Mbps. The LED will be off if the port is running at |
| 10Mbps. |
LINK/ACT | The LINK/ACT LED will illuminate if the port has an |
(per port) | active network connection. The LED will flicker if the port |
| is receiving or sending data. |
10/100 Network In a Box
The Hub’s Ports |
|
Ports | |
| It is through these ports that network information is |
| exchanged. |
Uplink | You can expand your network by connecting your hub to |
| another hub, switch, router or Broadband modem through |
| the Uplink port. If the Uplink port is being used, the port |
| adjacent to it will become inactive, reducing the hub’s oper- |
| able ports from five to four. |
4 | 5 |