Linksys FENSK05 v2 manual Linksys EtherFast Series

Linksys EtherFast® Series

Installing the EtherFast Network Driver if Networking is Already Installed

The following steps will install the EtherFast Card’s driver software on your PC, enabling your PC to properly communicate with the card. Remember that you must be logged on as a network administrator to continue.

1.Click on Start, Settings, Control Panel, then double-click on the Network icon.

2.When the networking window appears, choose the Adapters tab. Click the Add button.

Note: For information and help on choosing your bindings, services and protocols, ask your network administrator, or check your Windows NT documentation.

10/100 Network In a Box

3.When the list of available network adapters appears, click the Have Disk button.

4.Put the EtherFast Card disk into drive A. Type a:\ into the box on your screen and click OK.

5.Highlight the Linksys LNE100TX Fast Ethernet Adapter (LNE100TX v4) entry in the window that appears. Click OK.

36 37