Linksys EtherFast® Series
5.
6.First, choose Disable.
7.When asked if you want to Disable the device, click Yes.
8.
9.The Network Adapters category should be removed from the Device Manager listing.
10.Close the Device Manager, click the System Properties window’s OK but- ton, and restart your computer.
10/100 Network In a Box
Manually Installing the Network Components in Windows 95 & 98
There may be times when you might need to manually install missing Windows networking components.
1.Click on Start, Settings, then Control Panel.
2.
3.Click on the Configuration tab. Make sure that the following network components are installed.
•Client for Microsoft Networks
•Linksys LNE 100TX Fast Ethernet Adapter (LNE100TX v4)
•
•NetBEUI
•TCP/IP
There may be other components listed in addition to the ones shown above. If any of the above com- ponents are missing, add them as follows.
Client for Microsoft Networks
If you plan on connecting to an NT file server or
Client box. Highlight Client for Microsoft Networks and click OK. The com- puter will begin copying files to your system. When the installation is com- plete, you will be asked if you want to reboot. Click OK.
Client for NetWare Networks
If you plan on connecting to a Novell NetWare server (3.x), click on the Add button. Highlight Client and click on Add. In the Network Client window, select Manufacturer and choose Microsoft. Highlight Client for Microsoft Networks. Click OK. The computer will begin copying files to your system. When the installation is complete, you will be asked if you want to reboot. Click OK.
58 | 59 |