Linksys FENSK05 v2 Contents for the 10/100 Network in a Box, EtherFast 10/100 LAN Card, Link/Act

Page 4

Linksys EtherFast® Series

Contents for the 10/100 Network in a Box

10/100 Network In a Box

Getting to Know the EtherFast 10/100 Network In a Box

The EtherFast 10/100 LAN Card

You will install one EtherFast 10/100 LAN Card into each computer you wish to network.

• Two EtherFast 10/100 LAN Cards (version 4)
• Two Wake-on-LAN wires
•	One EtherFast 10/100 5-Port Workgroup Hub (version 2)
• Two Category 5 Network Cables
•	One 3.5” Driver Disk
•	Internet-Sharing Software

The Card’s LEDs
Link/Act	The Link LED will illuminate when the card has been suc-
	cessfully connected to a network and flicker when data is
	being transmitted or received over the network.

•	One AC Adapter
•	One User Guide

100The 100 LED will illuminate when the card is operating at 100Mbps. If the 100 LED is not illuminated and the PC is powered on, the card is operating at 10Mbps.

The Card’s RJ-45 Port

Note: Some 10/100 LAN Cards may have the 100 LED labeled Speed. The LEDs all operate as shown above, however, regardless of how they’re labeled.

The RJ-45 Port is where you will connect your network cabling. See page 66 for detailed information on cabling.

2

3

Image 4

Contents 10/100 Network In a Box Copyright & Trademarks Table of Contents IntroductionContents for the 10/100 Network in a Box EtherFast 10/100 LAN CardLink/Act Card’s RJ-45 PortEtherFast 10/100 5-Port Workgroup Hub Hub’s LEDsPer port Hub’s PortsInstalling the EtherFast 10/100 LAN Card Installing the Network Card & CablingOverview Remove your computers outside coverWindows 98 Installation & Setup Installing the Network Card’s DriverUnder no circumstance are you to click Cancel or Skip NextNetwork Component Configuration TCP/IPClick the OK button. File and Printer Sharing \windows\options\cabs Windows 95 Installation & Setup Installing the Driver in Windows 95 Version BVersion a Version B also known as OSR2 Windows 95 will automatically detectUnder no circumstance are you to click Cancel or Delete Linksys EtherFast Series Linksys EtherFast Series Windows 2000 Installation & Setup Installing the Driver in WindowsLinksys EtherFast Series Log into Windows NT as an administrator Windows NT 4.0 Installation & SetupInstalling NT Networking & the EtherFast Card Driver Linksys EtherFast Series Linksys EtherFast Series 10/100 Network In a Box Linksys EtherFast Series \i386 Novell NetWare Server Setup Installing a 3.12 ServerInstalling a 4.x Server Loading and binding are complete. The server is readyLoading and binding is complete. The server is ready Installing a 5.x ServerHighlight Save Parameters and Load Driver. Press Enter Troubleshooting Troubleshooting Hints for Windows 95You receive Dhcp Errors in Windows Network Neighborhood is EmptyLinksys EtherFast Series Running the Card’s Diagnostics AppendixSharing Your Files and Printers OverviewEnabling Printer Sharing Installing the Driver in Windows 95 Version aSlide the EtherFast Card Driver Disk into drive a Novell NetWare 3.x Client Setup for Windows 98 or NetWare portion of your Windows setup is completeNT portion of the Windows setup is complete Windows 98 or 95 Client for Windows NTStarting Over in Windows 95, 98 or Starting Over in Windows 95Starting Over in Windows Manually Installing the Network Components in Windows 95 Click on Start, Settings, then Control PanelClient for Microsoft Networks Client for NetWare NetworksInstalling and Configuring Wake-On-LAN IPX/SPX-compatible ProtocolNetBEUI Motherboard SupportLAN Use Testing a Link Change WOL PCSending a Magic Packet About Plug-and-Play PCI Technology Linux, Open Source and Beta Operating SystemsTwisted-Pair Cabling Crimping Your Own Network Cables10/100 LAN Card Specifications 10/100 LAN Card Environmentals10/100 5-Port Workgroup Hub Specifications Linksys Warranty Information10/100 5-Port Workgroup Hub Environmental Customer SupportCopyright 2000 Linksys, All Rights Reserved