Linksys HPN100 manual Client Setup

Page 26

Client Setup

Before enabling File and Printer Sharing, you should prepare your computer to be used with any file servers that may be on the network.

If you are not using Windows 95 with an NT or NetWare file server, skip the next two paragraphs. Otherwise:

Using the Card to Connect to a NetWare File Server

Click on My Computer, Control Panel, and Network. Change the Network Logon to Client for NetWare Network. Next, double-click on the client for NetWare networks. Put your server's name in the Preferred Server box. Click in the Enable Logon Script Processing box. Click on OK and restart your PC.

Note: This method is effective for NetWare 3.11 and 3.12 servers. for NetWare 4.x or higher, you should obtain and use Client32 instead.

Using the Card to Connect to a Windows NT Domain

Click on My Computer, Control Panel, and Network. Change the Primary Logon to Client for Microsoft Network. Double-click on the Client for Microsoft networks. Check the Log into Windows NT domain box. Put your NT domain name in the Windows NT domain area. Click on OK and restart your PC.

Continue with the installation instructions that appear on your screen, if any. When you're finished, restart your computer.

Note: In order for you to communicate with the other PCs on your network, you must enable File and Printer sharing. Please go on to the next page.

page 23

Image 26
Contents HomeLink Phoneline + 10/100 Network PC Card HomeLink Phoneline + 10/100 Network PC CardCopyright & Trademarks Page Contents Introduction Features How Does It Work?Sharing Your Internet Connection Package ContentsSharing Your Resources If You Want to Use Ethernet Hardware SetupBefore You Begin Installing the Hardware Installing the RJ-11 Telephone CablingInstalling the RJ-45 Ethernet Cabling Socket and Card Services About the SoftwareNetwork Driver Setup Preparing to Install the SoftwareWindows 98 Setup Page TCP/IP Page Page Client Setup Preparing to Use File and Printer Sharing Enabling File SharingHow To Share Printers Windows 95 Setup Page TCP/IP Page Page Client Setup Click OK. When asked to restart your PC, choose to do so How To Share Printers Windows NT 4.0 Setup Installing the SoftwareChoose Wired to the Network and click Next Page Page Page If You Have Problems Changing the Card Settings Ethernet Configuration Mode Selection Phoneline Configuration Twisted-Pair Cabling Telephone Cable Troubleshooting Troubleshooting Hints for WindowsSolutions Page Connecting to an Existing Network Multiple Network PC CardsUsing a Cable Modem or DSL Modem and the HomeLink PC Card Connecting 10Mbps Broadband and 1Mbps HomeLinkLinux, Open Source and Beta Operating Systems Adding Client for Microsoft Networks Manually Installing Network Components WindowsAdding NetBEUI Adding Client for Netware Networks Adding IPX/SPX-compatible ProtocolDEVICE=C\EMM386.EXE Enabling Pcmcia Services in Windows NT Specifications Customer Support T p / / w w w. l i n k s y s . c o m