Linksys HPN100 manual

Page 25

14.Click on the OK button. Your system may or may not ask you for your Windows 95 CD-ROM or the location of the 95 installation files. Direct Windows to the appropriate location, (D:\win95, C:\windows\options\cabs, etc.).

15.Once Windows is done copying the necessary files, the System Settings Change window appears. Remove all disks from your computer and click on Yes to restart your PC.

If you don't see the System Settings Change window, simply close down Windows 95 and restart your computer. The installation is complete. Remember to remove the installation disk from the floppy drive.

Look at the EtherFast Card's cable coupler. If your cabling is properly attached and the network is detected, the green Link light will be on, and the Activity (ACT) light will be flickering or solid.

16.Once the computer has restarted and Windows is up, a Logon window will appear requiring you to enter a username and password. Make up a username and password, enter them, and click OK. Do not click the Cancel button, or you won't be able to log onto the network. If the a logon does not appear or if it does not allow you to log on, refer to the Troubleshooting section in the back of this guide.

17.Once you are at the Windows 95 desktop, double-click on the Network Neighborhood icon. You should see the name of the network, and/or the names of the other PCs on the network. In order to see your computer in Network Neighborhood, you need to enable file and printer sharing, which is covered on pages 31-33.

If you don't see anything at all, press the F5 key on your keyboard a few times to refresh the screen.

If you only see your computer in Network Neighborhood, skip to the Troubleshooting section in the back of this guide.

If you see all computers on the network except yours, and the other PCs can't see your computer, see the Troubleshooting section.

page 22

Image 25
Contents HomeLink Phoneline + 10/100 Network PC Card HomeLink Phoneline + 10/100 Network PC CardCopyright & Trademarks Page Contents Introduction How Does It Work? FeaturesSharing Your Resources Package ContentsSharing Your Internet Connection Before You Begin Hardware SetupIf You Want to Use Ethernet Installing the RJ-11 Telephone Cabling Installing the HardwareInstalling the RJ-45 Ethernet Cabling About the Software Socket and Card ServicesPreparing to Install the Software Network Driver SetupWindows 98 Setup Page TCP/IP Page Page Client Setup Enabling File Sharing Preparing to Use File and Printer SharingHow To Share Printers Windows 95 Setup Page TCP/IP Page Page Client Setup Click OK. When asked to restart your PC, choose to do so How To Share Printers Installing the Software Windows NT 4.0 SetupChoose Wired to the Network and click Next Page Page Page If You Have Problems Changing the Card Settings Ethernet Configuration Mode Selection Phoneline Configuration Twisted-Pair Cabling Telephone Cable Troubleshooting Hints for Windows TroubleshootingSolutions Page Multiple Network PC Cards Connecting to an Existing NetworkConnecting 10Mbps Broadband and 1Mbps HomeLink Using a Cable Modem or DSL Modem and the HomeLink PC CardLinux, Open Source and Beta Operating Systems Adding NetBEUI Manually Installing Network Components WindowsAdding Client for Microsoft Networks Adding IPX/SPX-compatible Protocol Adding Client for Netware NetworksDEVICE=C\EMM386.EXE Enabling Pcmcia Services in Windows NT Specifications Customer Support T p / / w w w. l i n k s y s . c o m