Linksys HPN100 manual Mode Selection

Page 37

Mode Selection

You can set the HomeLink Phoneline + 10/100 Network PC Card to default to either a 10BaseT connection or Phoneline connection. Since there are three ports, the card is set to Auto Detect an active connection. Auto Detect will look first for a connection on the 10BaseT port, and if one is not found, the card will default to the Phoneline connection.

You can configure the card to use only one connection type.

•10/100 Ethernet (External) mode will force the card to use a 10/100 connection if one is present.

•10BaseT Ethernet (Internal) mode will force the card to use a 10Mbps connection if one is present.

•Phoneline mode will force the card to use only the 1Mbps Phoneline connection.

page 34

Image 37

Contents HomeLink Phoneline + 10/100 Network PC Card HomeLink Phoneline + 10/100 Network PC CardCopyright & Trademarks Page Contents Introduction How Does It Work? FeaturesSharing Your Resources Package ContentsSharing Your Internet Connection Before You Begin Hardware SetupIf You Want to Use Ethernet Installing the RJ-11 Telephone Cabling Installing the HardwareInstalling the RJ-45 Ethernet Cabling About the Software Socket and Card ServicesPreparing to Install the Software Network Driver SetupWindows 98 Setup Page TCP/IP Page Page Client Setup Enabling File Sharing Preparing to Use File and Printer SharingHow To Share Printers Windows 95 Setup Page TCP/IP Page Page Client Setup Click OK. When asked to restart your PC, choose to do so How To Share Printers Installing the Software Windows NT 4.0 SetupChoose Wired to the Network and click Next Page Page Page If You Have Problems Changing the Card Settings Ethernet Configuration Mode Selection Phoneline Configuration Twisted-Pair Cabling Telephone Cable Troubleshooting Hints for Windows TroubleshootingSolutions Page Multiple Network PC Cards Connecting to an Existing NetworkConnecting 10Mbps Broadband and 1Mbps HomeLink Using a Cable Modem or DSL Modem and the HomeLink PC CardLinux, Open Source and Beta Operating Systems Adding NetBEUI Manually Installing Network Components WindowsAdding Client for Microsoft Networks Adding IPX/SPX-compatible Protocol Adding Client for Netware NetworksDEVICE=C\EMM386.EXE Enabling Pcmcia Services in Windows NT Specifications Customer Support T p / / w w w. l i n k s y s . c o m