Linksys WPS54G manual Status Tab Device, Server Details

Page 34

Wireless-G PrintServer

The Status Tab - Device

The Device tab allows you to view information about the PrintServer.

Server Details

The PrintServer’s settings and status information are displayed here. No values can be changed on this screen. This screen is for information only.

Upgrade. If you want to upgrade the PrintServer’s firmware, follow these instructions:

1.Visit www.linksys.com and download the firmware upgrade file for the Wireless-G PrintServer.

2.Extract the file on your computer.

3.On the Device screen, click the Upgrade button.

4.On the Firmware Upgrade screen, enter the location of the extracted firmware file, or click the Browse button to find this file.

5.Click the Start Upgrade button, and follow the on-screen instructions.

On the Device screen, click the Refresh button to retrieve this information again.

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Figure 6-11: Status Tab - Device

firmware: the programming code that runs a networking device

download: to receive a file transmitted over a network

upgrade: to replace existing software or firmware with a newer version

Figure 6-12: Firmware Upgrade

28

The Status Tab - Device

Image 34

Contents 802 GHz .11g Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Appendix B Wireless Security Bi-Admin ManagementAppendix a Troubleshooting Internet Printing Protocol IPPPrintServer’s Bottom Panel PrintServer’s Front PanelWireless Tab Security WEP Introduction WelcomeWhat’s in this Guide? Wireless-G PrintServer Getting to Know the PrintServer USB Connector-Type aBottom Panel PrintServer’s LEDs are located on the front panel Power Front PanelConnecting the PrintServer to Your Network Connecting the PrintServerOverview Placement Options Desktop PlacementConfiguring the PrintServer Using the Setup Wizard InstallationBasic Settings Ssid your wireless network’s name Wireless Security Settings Confirmation Windows Driver Installation Choose Destination Location Setup Complete Starting the Print Driver Utility InformationConfigure Printer Port Configuring the PrintServer Using the Web-based Utility WPS54G Device Name Setup TabPassword ProtocolsIP Address Protocol Tab TCP/IPConnection Protocol Tab AppleTalk CommunicationDomain Name Protocol Tab NetBEUIOptions Management Stations Protocol Tab SnmpGeneral Trap ReceiversWireless Tab Basic ConfigurationWireless Tab Security Wireless SecurityMail Server Printer Tab Internet PrintingPrinter Select Printer Printer Tab Logical PortDetails Status Tab Device Server DetailsStatus Tab Printer Status Tab WirelessExit Tab Bi-Admin Management Bi-Admin InstallationSelect Program Folder Starting the Bi-Admin Management Utility Connected ProtocolBi-Admin Management Utility Menu OptionsPrinter Status 10 Configuration System TCP/IP 12 Configuration AppleTalk 13 Configuration NetBEUI 14 Configuration Internet Printing 15 Configuration Port 16 Configuration Wireless Snmp 18 Upgrade Installing using setup.exe Windows IPP Client SetupInternet Printing Protocol IPP IPP Client Configuration for Windows 98, Me, 2000, and XP Changing the IPP Port Settings IPP Client Setup for Windows XPIPP Client Setup for Windows Windows XP Specify a PrinterUsing IPP Printers Appendix a Troubleshooting Common Problems and SolutionsNeed to upgrade the firmware Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G PrintServer Appendix C About Bi-Directional Printing Appendix D Upgrading Firmware Figure D-1 Status Tab DeviceShared Resources Appendix E Windows HelpNetwork Neighborhood/My Network Places Appendix F Glossary Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Appendix G Specifications Appendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementSafety Notices Chapter J Contact Information

Related manuals

Manual 2 pages 36.01 Kb