Linksys WPS54G manual Need to upgrade the firmware

Page 56

Wireless-G PrintServer

7.To start over, I need to set the PrintServer to its factory default settings.

Unplug the PrintServer’s power adapter. Press the Reset button while you plug in the PrintServer’s power adapter. Continue to hold the Reset button for 10 seconds and then release it. This will reset the password, wireless, and other settings on the PrintServer to the factory defaults. In other words, the PrintServer will revert to its original factory configuration.

8.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, follow these steps:

1.Go to the Linksys website at http://www.linksys.com and download the latest firmware for the PrintServer. Then extract the firmware file on your PC.

2.Open the PrintServer’s Web-based Utility. Click Status and then Device.

3.Click the Upgrade button, and follow the on-screen instructions.

Appendix A:

50

Common Problems and Solutions

Image 56
Contents 802 GHz .11g Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Bi-Admin Management Appendix a TroubleshootingAppendix B Wireless Security Internet Printing Protocol IPPPrintServer’s Bottom Panel PrintServer’s Front PanelWireless Tab Security WEP Introduction WelcomeWhat’s in this Guide? Wireless-G PrintServer Bottom Panel USB Connector-Type aGetting to Know the PrintServer PrintServer’s LEDs are located on the front panel Power Front PanelOverview Connecting the PrintServerConnecting the PrintServer to Your Network Placement Options Desktop PlacementConfiguring the PrintServer Using the Setup Wizard InstallationBasic Settings Ssid your wireless network’s name Wireless Security Settings Confirmation Windows Driver Installation Choose Destination Location Setup Complete Starting the Print Driver Utility InformationConfigure Printer Port Configuring the PrintServer Using the Web-based Utility Setup Tab PasswordWPS54G Device Name ProtocolsConnection Protocol Tab TCP/IPIP Address Protocol Tab AppleTalk CommunicationOptions Protocol Tab NetBEUIDomain Name Protocol Tab Snmp GeneralManagement Stations Trap ReceiversWireless Tab Basic ConfigurationWireless Tab Security Wireless SecurityPrinter Printer Tab Internet PrintingMail Server Details Printer Tab Logical PortSelect Printer Status Tab Device Server DetailsExit Tab Status Tab WirelessStatus Tab Printer Bi-Admin Management Bi-Admin InstallationSelect Program Folder Starting the Bi-Admin Management Utility Connected ProtocolBi-Admin Management Utility Menu OptionsPrinter Status 10 Configuration System TCP/IP 12 Configuration AppleTalk 13 Configuration NetBEUI 14 Configuration Internet Printing 15 Configuration Port 16 Configuration Wireless Snmp 18 Upgrade Internet Printing Protocol IPP Windows IPP Client SetupInstalling using setup.exe IPP Client Configuration for Windows 98, Me, 2000, and XP Changing the IPP Port Settings IPP Client Setup for Windows XPIPP Client Setup for Windows Windows XP Specify a PrinterUsing IPP Printers Appendix a Troubleshooting Common Problems and SolutionsNeed to upgrade the firmware Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G PrintServer Appendix C About Bi-Directional Printing Appendix D Upgrading Firmware Figure D-1 Status Tab DeviceNetwork Neighborhood/My Network Places Appendix E Windows HelpShared Resources Appendix F Glossary Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Appendix G Specifications Appendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementSafety Notices Chapter J Contact Information
Related manuals
Manual 2 pages 36.01 Kb