Linksys WPS54G manual Upgrade

Page 49

Wireless-G PrintServer

•Upgrade. You may use this option to upgrade the firmware of the PrintServer. Follow these instructions:

1.On the Upgrade screen, click the Files button.

2.The Detected LAN Cards screen will appear. Select the LAN card the PrintServer is connected to, and then click the OK button.

3.Follow the on-screen instructions, and select the firmware file you want to use.

4.View the BIN File Information screen, and click the OK button if you have selected the correct firmware file. Click the Cancel button to select a different firmware file.

5.On the Upgrade screen, click the Upgrade button. Click the Cancel button to cancel the firmware upgrade. For more information, click the Help button.

•Refresh. This option allows you to refresh the device list after you change the name or IP address of a device. The screen does not refresh automatically.

•Exit. This option allows you to exit the Bi-Admin program.

InitDevice. The available options are Reset Device, Restore to Factory Default, Attached Remote, and Connected Protocol.

If you click Attached Remote, the Add Cross Segment Printer screen appears. To add a cross segment print server, enter its IP address in the fields provided, and click the Set button.

Click Cancel to undo any changes. For more information, click the Help button.

Diagnostic. Diagnostic allows you to print a test page from either of the PrintServer’s ports.

Help. The two options are Help Topics and About Bi-Admin. These help files offer extensive advice and details about all of the PrintServer’s functions and capabilities.

Chapter 7: Bi-Admin Management

Figure 7-18: Upgrade

Figure 7-19: Detected LAN Cards

Figure 7-20: BIN File Information

Figure 7-21: Add Cross Segment PrintServer

43

The Bi-Admin Management Utility

Image 49

Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use this User GuideTable of Contents Appendix a Troubleshooting Bi-Admin ManagementAppendix B Wireless Security Internet Printing Protocol IPPPrintServer’s Front Panel PrintServer’s Bottom PanelWireless Tab Security WEP Welcome IntroductionWhat’s in this Guide? Wireless-G PrintServer Getting to Know the PrintServer USB Connector-Type aBottom Panel Front Panel PrintServer’s LEDs are located on the front panel PowerConnecting the PrintServer to Your Network Connecting the PrintServerOverview Desktop Placement Placement OptionsInstallation Configuring the PrintServer Using the Setup WizardBasic Settings Ssid your wireless network’s name Wireless Security Settings Confirmation Windows Driver Installation Choose Destination Location Setup Complete Information Starting the Print Driver UtilityConfigure Printer Port Configuring the PrintServer Using the Web-based Utility Password Setup TabWPS54G Device Name ProtocolsIP Address Protocol Tab TCP/IPConnection Communication Protocol Tab AppleTalkDomain Name Protocol Tab NetBEUIOptions General Protocol Tab SnmpManagement Stations Trap ReceiversConfiguration Wireless Tab BasicWireless Security Wireless Tab SecurityMail Server Printer Tab Internet PrintingPrinter Select Printer Printer Tab Logical PortDetails Server Details Status Tab DeviceStatus Tab Printer Status Tab WirelessExit Tab Bi-Admin Installation Bi-Admin ManagementSelect Program Folder Connected Protocol Starting the Bi-Admin Management UtilityMenu Options Bi-Admin Management UtilityPrinter Status 10 Configuration System TCP/IP 12 Configuration AppleTalk 13 Configuration NetBEUI 14 Configuration Internet Printing 15 Configuration Port 16 Configuration Wireless Snmp 18 Upgrade Installing using setup.exe Windows IPP Client SetupInternet Printing Protocol IPP IPP Client Configuration for Windows 98, Me, 2000, and XP IPP Client Setup for Windows XP Changing the IPP Port SettingsWindows XP Specify a Printer IPP Client Setup for WindowsUsing IPP Printers Common Problems and Solutions Appendix a TroubleshootingNeed to upgrade the firmware Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G PrintServer Appendix C About Bi-Directional Printing Figure D-1 Status Tab Device Appendix D Upgrading FirmwareShared Resources Appendix E Windows HelpNetwork Neighborhood/My Network Places Appendix F Glossary Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Wireless-G PrintServer Appendix G Specifications Limited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationSafety Notices Chapter J Contact Information

Related manuals

Manual 2 pages 36.01 Kb