Linksys WPS54G manual Wireless Tab Basic, Configuration

Wireless-G PrintServer

The Wireless Tab - Basic

This screen allows you to change the PrintServer’s basic wireless settings.

Configuration

Regulatory Domain and MAC Address. The PrintServer’s Regulatory Domain and MAC Address are listed and cannot be changed.

SSID. In the SSID field, enter the name of your wireless network. This is the unique name shared by all devices in a wireless network. The SSID is case-sensitive and should have 32 characters or fewer.

Channel No. If your network is set to ad-hoc mode, select your network’s channel setting from the Channel No. drop-down menu.

Network Type. The Network Type setting shows a choice of two wireless modes. Select Infrastructure if you want the PrintServer to communicate using an access point or wireless router. Select Ad-Hoc if you want the PrintServer to communicate without using an access point or wireless router.

Click the Save button to apply your changes, or click Cancel to cancel your changes.

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Figure 6-6: Wireless Tab - Basic

24

The Wireless Tab - Basic