NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
1-3
v1.0, December 2007
• Warranty and Support information card
• A plastic cradle to hold the WN111
• Velcro fasteners to attach the WN111 to the plastic cradle
• USB adapter cable
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
WN111 Default Wireless Settings
If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
Your RangeMax Next WN111 Wireless USB 2.0 Adapter factory default basic settings are:
• Network Name Service Set Identification (SSID): Any (First available network)
• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled
Installation
To install the RangeMax Next WN111 Wireless USB 2.0 Adapter:
1. First, install the WN111 software:
Insert the Resource CD. If the Welcome screen does not open, double click Autorun.exe on the
CD.
Note: In order for the RangeMax Next WN111 Wireless USB 2.0 Adapter to
communicate with a wireless access point or wireless adapter, all devices must
be set up to use the same wireless network name (SSID).