NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
•Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default WN111 wireless network name (SSID). You might customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below.
Note: The SSID in the wireless access point is the SSID you configure in the wireless 
USB adapter. For the access point and wireless nodes to communicate with
each other, all must be configured with the same SSID.
Wireless network name (SSID): ______________________________
•If WEP Authentication is Used.
—WEP Encryption key size. Identify one:
—Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below.
•Passphrase method. ______________________________ These characters are case sensitive. Enter a word or group of printable characters and click the Generate Keys button. Not all wireless devices support the passphrase method.
•Manual method. These values are not case sensitive. For
Key 1: _____________________________ Key 2: _____________________________
Key 3: _____________________________ Key 4: _____________________________
•If WPA2-PSK or WPA-PSK Authentication is Used.
—Passphrase: ______________________________ These characters are case sensitive. Enter a word or group of printable characters. When you use
Setting up WEP Encryption Security
Follow these steps to configure WEP Encryption Security:
1.Run the WN111 Smart Wizard.
a.Make sure the WN111 software is installed and the WN111 is connected to the USB port in your computer.
