Installing the Interface Module
To Install the HP 16500H Hardware
3Slide the interface module into the mainframe through the slot in the rear panel.
4Install the screws connecting the interface module to the mainframe.
Two screws through the top of the interface module connect it to the sheetmetal plate, and four screws through the rear plate of the interface module connect it to the rear panel of the mainframe.
5Connect the
Before installing the cable, inspect the cable and the connectors for any signs of damage.
a Slide the
b Connect the cable to the CPU board.
c Connect the cable to the interface module.
6Replace the top and bottom covers, the optional modules, and the rear feet of the mainframe.