Agilent Technologies HP 16505A, HP 16500 manual Verify the Interface Module Performance Procedure

Page 20

Servicing the Interface Module

Verify the Interface Module Performance

Procedure

This procedure verifies the performance of the interface module. To verify

 

performance of the HP 16500B Logic Analysis System or the optional

 

measurement modules, refer to the Service Guides for those products.

1If the screen appears blank, the interface module or cable may be defective.

a Remove power from the HP 16500B, disconnect the power cable, then remove the top cover.

b Remove and inspect the interface module cable for signs of damage. If the cable appears defective, replace it.

c Ensure that the cable is connected according to the installation procedures and that all cables are properly seated. For installation procedures, refer to chapter 2, "Installing the Interface Module."

d Install the top cover of the HP 16500B mainframe, connect the power cable, and reapply power.

2Touch the blue field in the upper-left corner of the HP 16500B screen. Select System from the pop-up menu .

3Touch the blue field immediately to the right. In the pop-up menu, select Configuration.

4Verify that "Ethernet" is available in the Communications menu on the HP 16500B System Configuration screen.

Ethernet should be listed here

3-3

Page 19 Page 21
Image 20
Page 19 Page 21
Contents About this Manual HP 16500H Interface Module This Book See AlsoContents Contents-2 Introducing the HP 16500H Interface Module Introducing the HP 16500L LAN Interface Module Physical Connections Accessories SuppliedRequirements LAN Support Installing the Interface Module To Install the HP 16500H Hardware Installing the Interface Module To Verify the Installation Set up the configuration menus on the HP 16500B mainframe Ethernet LAN InterfaceVerify connectivity with an echo request Mount the HP 16500B system with an NFS mountHP 16501A Expansion Frame Interface HP 16505A Protoytype Analyzer Servicing the Interface Module Verifying the Interface Module PerformanceVerify the Interface Module Performance Verify the Interface Module Performance Procedure Verify the Interface Module Performance Verify the Interface Module Performance Exit the Test System Troubleshooting an HP 16501A Expansion Frame Troubleshooting in an Ethernet LAN Environment Servicing the Interface Module Turn off the power switch located on the front panel Removing and Replacing the HP 16500H Interface ModuleRemoving the Interface Module Removing and Replacing the HP 16500H Interface Module Remove accessories from the module Returning PartsPackage the module or assemblies Seal the shipping container securely, and mark it FragileParts listed Ordering Replaceable PartsReplaceable Parts List HP 16500H Interface Module Replacment PartsPage Index CablesIndex-2 Document Warranty Product Warranty Declaration of Conformity
Top Page Image Contents