Agilent Technologies HP 16505A manual Removing and Replacing the HP 16500H Interface Module

Page 27

Servicing the Interface Module

Removing and Replacing the HP 16500H Interface Module

Removing and Replacing the HP 16500H Interface Module

1If the HP 16500B Logic Analysis System is connected and mounted to a LAN, then unmount the HP 16500B file system.

Unmounting from a LAN

You must unmount the HP 16500B before power is removed from it. Then, you can mount the HP 16500B 15 seconds after the System Configuration menu is displayed when powering up the instrument. You can write a network script that executes an unmount and mount procedure.

2If the HP 16500B Logic Analysis System is being used in the HP

16505A prototype analyzer environment: a Save all work and close all windows.

b Open the Session Manager window, then select Power Down.

c Remove power from the HP 16505A Prototype Analyzer, then remove power from the HP 16500B mainframe.

d Disconnect the HP 16505A interface cable, HP 16501A interface cable, and LAN cable from the interface board.

3Turn off the power switch located on the front panel of the

HP 16500B mainframe and the standby switch located on the rear panel. Then, unplug the power cord from the mainframe.

Refer to the HP 16500B Service Guide if you need instructions for removing and replacing parts of the HP 16500B.

3Remove the two rear feet on the top and the top cover of the HP 16500B mainframe.

4On the interface module, disconnect the cable from the CPU board.

3-10

Page 26 Page 28
Image 27
Page 26 Page 28
Contents About this Manual HP 16500H Interface Module See Also This BookContents Contents-2 Introducing the HP 16500H Interface Module Introducing the HP 16500L LAN Interface Module Accessories Supplied RequirementsPhysical Connections LAN Support Installing the Interface Module To Install the HP 16500H Hardware Installing the Interface Module To Verify the Installation Ethernet LAN Interface Set up the configuration menus on the HP 16500B mainframeMount the HP 16500B system with an NFS mount Verify connectivity with an echo requestHP 16501A Expansion Frame Interface HP 16505A Protoytype Analyzer Verifying the Interface Module Performance Servicing the Interface ModuleVerify the Interface Module Performance Verify the Interface Module Performance Procedure Verify the Interface Module Performance Verify the Interface Module Performance Exit the Test System Troubleshooting an HP 16501A Expansion Frame Troubleshooting in an Ethernet LAN Environment Servicing the Interface Module Removing and Replacing the HP 16500H Interface Module Turn off the power switch located on the front panelRemoving the Interface Module Removing and Replacing the HP 16500H Interface Module Seal the shipping container securely, and mark it Fragile Remove accessories from the moduleReturning Parts Package the module or assembliesOrdering Replaceable Parts Parts listedHP 16500H Interface Module Replacment Parts Replaceable Parts ListPage Cables IndexIndex-2 Document Warranty Product Warranty Declaration of Conformity
Top Page Image Contents