Alloy Computer Products BWS-136 user manual All command strings are in Upper Case

				e.g. $SOS0D0A (CR/LF)
	G	S	OT: Timeout		0~65535
					(unit: ms)
				e.g.$SOT500
	G	S	OL: Data Length		0~1024
				e.g.$SOL20
Access	G	S	OF:IP Filtering		0: Disable
Control					1:Enable
	G	S	OI: Authorized IP	e.g.$SOI192.168.16.1:192.1
				68.16.9	(Starting IP:Ended
				IP)
TCP Server	G	S	VP: Listen Port	1~65535
				e.g. $SVP4000
TCP Client	G	S	CI: Destination IP	e.g.$SCI192.168.16.200
	G	S	CP: Destination Port	e.g.$SCP4001
	G	S	CC: Connection	0: Reserved for PPPoE
			Logic	1:Establish connection when
				Serial Data in
System		S	YC: System mode	R: Reboot system
				F: Reset to default setting
				and reboot
				D: Set current setting as
				Default setting
		S	EI: Exit console
DIO		S	DM: Set Digital I/O	I Input	O Output
			mode	H pull high, L pull low
BWS-136 User Manual_amend.doc				- 31 -

			e.g. $SDMI:0,4,5
			set DIO0, DIO4, DIO5 as
			input
			$SDMO:1,H,2,L,4,H,7,L
			set DIO1 high ,DIO2 low,
			DIO4 high, DIO7 low as
			Output
G	DM: Get	Digital	e.g. $GDM
	I/O mode		the response is
			%GDM I,O,O,O,I,I,O,O
G	DI: Get DI	channel	e.g. $GDI
	status		the response is
			%GDI 0=1,4=0,5=1
			It stands for
			DIO0=1,DIO4=0,DIO5=1

Remark: Italic font stands for Command String

CR/LF (two bytes): Both command from host and echo from BWS-136 are terminated with a Carriage Return (ACSII code Hex 0d) and Line Feed (ASCII code Hex 0a). Therefore please remember to add CR/LF at the end of command line in the terminal emulation program.

All command strings are in Upper Case

BWS-136 User Manual_amend.doc - 32 -