Paradyne 9720, 9788 Show Command Summary

D. Router Command Line Summaries and Shortcuts
D-2 December 2002 9700-A2-GB20-20
Show Command Summary
TableD-1, Show Commands, lists all of the show, or display, commands for the
CLI.
Table D-1. Show Commands
Command Function
show arp Displays all the devices in the router’s ARP
table.
show bridge Displays the router’s bridge forwarding
database entries.
show configuration Displays the router’s current configuration.
show configuration {saved|unsaved} Shows the current configuration, either saved in
memory or entered during the current session.
show frame-relay map Shows the status of all frame relay DLCIs on
the router’s frame relay interface.
show interface
[ intf-type intf-num [ .sub-intf-num ] ]
Shows the status of the specified interface,
sub-interface, or all interfaces and
sub-interfaces for the router.
show ip dhcp binding [ ip-address ] Shows the address bindings associated with
the DHCP server.
If an IP address is specified, only bindings
for that client will be displayed.
If no IP address is specified, all DHCP
server bindings are displayed.
show ip nat translations Displays all the address bindings associated
with the DHCP server.
show ip route [ ip-address ] Shows the Routing Table entry for the device
with the specified IP address, or all Routing
Table entries if no IP address is specified.
show ip traffic Shows IP statistics for the router.
show spanning-tree Displays the router’s spanning-tree topology.