Paradyne 9720, 9788 manual Trap warmStart, Trap authenticationFailure, Variable-Binding, String

B. SNMP MIBs, Traps, and RMON Alarm Defaults

Trap: warmStart

This trap indicates that the FrameSaver unit has been reset and has stabilized.

Table B-3. warmStart Trap

Trap	What It Indicates	Possible Cause
warmStart	FrameSaver unit has just	Reset command sent.
	itself.reinitialized and stabilized	￿Power disruption.
		String:
	Variable-Binding
		‘Unit reset.’
	devLastTrapString
	(devHealthAndStatus.mib)

Trap: authenticationFailure

This trap indicates that access to the FrameSaver unit was unsuccessful due to lack of authentication.

Table B-4. authenticationFailure Trap

Trap	What It Indicates	Possible Cause
authenticationFailure	Access to the FrameSaver		SNMP protocol message not
	unit was attempted and failed.	￿properly authenticated.
			Three unsuccessful attempts
			were made via a Telnet session
			or locally at the asynchronous
			terminal to enter a correct login
			user ID/password combination.
		￿	IP Address security is enabled
			and a message was received
			from the SNMP Manager
			whose address was not on the
			list of approved managers.
		String:
		‘Unauthorized access attempted.’
		(e.g., ‘Unauthorized access
		attempted from COM port.’)
	Variable-Binding
	devLastTrapString
	(devHealthAndStatus.mib)

9700-A2-GB20-20 December 2002 B-7