Paradyne 9720, 9788 Limiting Telnet or FTP Access Over the TS Management Link

6. Security and Logins
9700-A2-GB20-20 December 2002 6-7
Limiting Telnet or FTP Access Over the TS Management Link
Procedure
To limit Telnet or FTP access for a session on the TS Management Link:
1. Select the Telnet and FTP Sessions options.
Main Menu Configuration Management and Communication
Telnetand FTP Sessions
2. Disable Telnet Session and/or FTP Session, as appropriate.
3. Return to the Management and Communication menu, and select Node IP.
Main Menu Configuration Management and Communication
Node IP
4. Set the following configuration options, as appropriate:
5. Save your changes.
See
Configuring Telnet and/or FTP Sessions or Configuring Node IP Information
in Chapter 4,
Configuration Options, for more information about these
configuration options.
To . . . Set the configuration option . . .
Disable access via a
TSManagement Link
TS Management Link to: None.
Assign an access
level to the TS
Management Link
TS Management Link Access Level to: Level-2 orLevel-3.
NOTE: A user cannot operate at a level higher than the
access level specified for the session. To allow users to
configure the unit, keep the access at Level-1.