D-Link DES-5024 manual Create New Vlan, New Vlan Name, Port #, TrunkGroup

Page 76

Fast Ethernet Switching System User’s Guide

Create New VLAN

The Create New VLAN menu, displayed in Figure 37, is used to create a new VLAN. The default value is that all ports belong to one VLAN. You can create up to eight separate VLANs. Ports can belong to two VLANs at the same time. Each VLAN is a broadcast domain. If you have created a trunking group, you must include the entire trunk group in the VLAN.

Figure 37: Create New VLAN menu

New VLAN Name

Is the name of the VLAN you are creating. All VLANs must have a unique name.

Port #

Is the number of the port. The numbers on the panel match the ports on the DES-5024. Some ports are combined. For example, ports 5 and 9 are shown as “Port 5/9”. Ports that are grouped together must be part of the same VLAN.

TrunkGroup

This field identifies the trunk group that the port has been assigned to. The field is open if the port has not been assigned to a Trunk Group.

Status

The status field can be either available or selected. Available indicates that the port is available for inclusion in a VLAN. Selected indicates the port has been assigned to a

Managing the DES-5024

68

Image 76
Contents DES-5024 Fast Ethernet Switching System User’s Guide Link Limited Warranty Hardware North, Central, and South America Copyright Statement Wichtige Sicherheitshinweise Table of Contents Page Page Audience About This GuideOrganization Features IntroductionPage Front Panel DES-5024 Front PanelRear Panel DES-5024 Rear PanelManagement Methods Updating FirmwareLocal Console Management Telnet ManagementInstalling the DES-5024 Unpacking the DES-5024Installation Options Desktop/ Shelf Installation Install Feet on BottomAttach Feet Rack Installation Attach Mounting Brackets Insert into Rack Installing Modules Remove Blank Bracket Insert Optional Module Power On Cable Specifications Connecting the DES-5024 to the NetworkCopper Cable Cable Diagram Fiber Optic Cable Ports MDI-X PortsFiber Optic Ports RS-232 PortConnecting the DES-5024 to other Switches and Hubs DES-5024 to DES-5024 ConnectionLEDs DES-5024 LEDsPower CPU ModuleLED Port 10/100-TX Module LinkPort 100BASE-FX Module ColLit Dark Port 1000BASE-SX Module ActManaging the DES-5024 Local Console Management ∙ Data bits ∙ Parity None ∙ Stop bits ∙ Flow Control NoneTelnet ∙ Default User Name D-Link ∙ Default Password D-Link LogHelp Message Help MessagePanel Conventions SpacebarConsole Program System ConfigurationUser Account Management 100BASE-FX/ 1000BASE-SX Switch Port Module Spanning Tree ConfigurationSnmp Management Configuration Vlan Port ManagementSystem Configuration Menu System ResetFactory Reset to Default Config Values System InformationSoftware Update Boot Prom Firmware VersionSystem Information Menu Hardware RevisionLAN Default Gateway MAC AddressSystem Description System NameSystem Reset System ResetFactory Reset Factory ResetFactory Reset confirmation Advantages of Store and Forward System Rate ControlDisadvantages of Store and Forward Advantages of Cut-Through Disadvantages of Cut-ThroughSoftware Update Menu Software Update menuTransfer Firmware Xmodem User Account Management User Account Change MenuPassword Confirm PasswordAccess Level Create New UserPage Status Delete UsersDelete Page Old Password Change PasswordNew Password Page Switch Port Configuration State Switch Port Configuration MenuPhysical Priority Port StateFlow Control Spanning Tree Configuration Menu Spanning Tree ConfigurationSTA Operation Levels Forward Delay Time Spanning Tree AlgorithmBridge Priority Root CostRoot Bridge Root PortSnmp Management Configuration Snmp Management Configuration Menu Snmp Manager SettingAccess Right Snmp Community StringSnmp Trap Manager Setting Authentication FailureCold Start Link Change EventPage Vlan Port Management Vlan Port Management Menu Vlan Port Management menuCreate New Vlan New Vlan NamePort # TrunkGroupPage Delete Vlan Menu Vlan NameModify Vlan Menu Virtual LAN NameTrunking Port Management Menu Trunking Port Management menuNew Trunking Group Name Create New Trunking PortName Page Trunking Port Delete Trunking PortModify Trunking Port Trunking Port Name Modify Trunking PortTroubleshooting ProblemSolutionPage Diagnostic LED Switch Specifications Appendix a DES-5024 Technical SpecificationsPort Specifications 10BASE-T EMI Fast Ethernet Switching System User’s Guide Performance Access Level IndexUser Name 50, 52